5-21
Cisco SCE 8000 10GBE Software Configuration Guide
OL-30621-02
Chapter 5 Configuring the Management Interface and Security
Authentication, Authorization, and Accounting
To define a global default key, do the following:
From the SCE(config)# prompt, type:
To clear a global default key, do the following:
From the SCE(config)# prompt, type:
Configuring the Global Default Timeout
Use this command to define the global default timeout interval for the server hosts. This
default timeout interval can be overridden for a specific server host by explicitly configuring
a different timeout interval for that server host.
Options
The following options are available:
•
timeout interval—
Default time in seconds that the server waits for a reply from the server host
before timing out.
–
Default = 5 seconds
To define the global default timeout, do the following:
From the SCE(config)# prompt, type:
Command
Purpose
tacacs-server key
key-string
Defines the global default key for the
server hosts.
Command
Purpose
no tacacs-server key
No global default key is defined. Each
server host may still have a specific key defined.
However, any server host that does not have a key
explicitly defined (uses the global default key) is
now configured to use no key.
Command
Purpose
tacacs-server timeout
timeout-interval
Defines global default timeout.
