manualshive.com logo in svg

Cisco SCE 8000 10GBE, Руководство по настройке программного обеспечения

Поделиться
Скачать
Cisco SCE 8000 10GBE Скачать руководство пользователя страница 467

C-1

Cisco SCE 8000 10GBE Software Configuration Guide

OL-30621-02

A P P E N D I X

 

C

Cisco SCE 8000 Licensing Information

Revised: February 07, 2014, OL-30621-02

OpenSSH License

This file is part of the OpenSSH software.

The licences which components of this software fall under are as follows. First, we will summarize and 
say that all components are under a BSD licence, or a licence more free than that.

OpenSSH contains no GPL code.

1.

* Copyright (c) 1995 Tatu Ylonen <[email protected]>, Espoo, Finland

*                    All rights reserved

     *

     * As far as I am concerned, the code I have written for this software

     * can be used freely for any purpose.  Any derived versions of this

     * software must be clearly marked as such, and if the derived work is

     * incompatible with the protocol description in the RFC file, it must be

     * called by a name other than "ssh" or "Secure Shell".

[Tatu continues]

     *  However, I am not implying to give any licenses to any patents or

     * copyrights held by third parties, and the software includes parts that

     * are not under my direct control.  As far as I know, all included

     * source code is used in accordance with the relevant license agreements

     * and can be used freely for any purpose (the GNU license being the most

     * restrictive); see below for details.

    [However, none of that term is relevant at this point in time.  All of these restrictively licenced 
software components which he talks about have been removed from OpenSSH, i.e., 

  –

RSA is no longer included, found in the OpenSSL library

  –

IDEA is no longer included, its use is deprecated

  –

DES is now external, in the OpenSSL library

Содержание SCE 8000 10GBE































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды