S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
1-30
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Chapter 1 Product Overview
Port Index Availability
Table 1-10
shows a valid sample configuration for maximum capacity within the port index limits. The
table lists a mixture of Generation 1 and Generation 2 modules on a Cisco MDS 9509 Director.
Table 1-11
shows a sample configuration that exceeds the port index limit. The table lists a mixture of
Generation 1 storage IPS modules and Generation 2 modules on a Cisco MDS 9509 Director. In this
example, one of the modules installed will not boot up because the number of port indexes needed has
been exceeded.
Table 1-9
Port Index Requirements
Supervisor
Module
Port Index Requirements
Supervisor-1
Generation 1
Indexes must be:
•
Contiguous
•
In the range assigned to the given slot
•
Start with the lowest value assigned to
that slot
Maximum 252 assignable port indexes
available,
Generation 2
Indexes can be any available number in the
range 0–252.
Supervisor-2
Generation 1
Indexes must be contiguous, but can be any
available contiguous block in the range
0–252.
Generation 2
Indexes can be any available number in the
range 0–1020 if all modules are Generation
2 modules. Otherwise, indexes can be any
available number in the range 0–252.
Table 1-10
Sample Chassis Configuration on a Cisco MDS 9509 Director (Valid)
Slot No.
Modules in Cisco MDS 9509 Director
Generation
Physical
Ports
Port
Indexes
1
12-port 4-Gbps Fibre Channel switching module
1
12
12
2
48-port 4-Gbps Fibre Channel switching module
2
48
48
3
48-port 4-Gbps Fibre Channel switching module
2
48
48
4
48-port 4-Gbps Fibre Channel switching module
2
48
48
5
Supervisor-1
1
6
Supervisor-1
1
7
48-port 4-Gbps Fibre Channel switching module
2
48
48
8
48-port 4-Gbps Fibre Channel switching module
2
48
48
9
Totals
252
252
