4-10
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Chapter 4 Installing the VDS Internet Streamer Software and Initially Configuring a CDE
Launching a New CDE for the First Time
Step 6
Click
Save Changes
.
What to do next
Configure SNMP trap settings as described in
Configuring SNMP Trap Settings
.
Configuring SNMP Trap Settings
Before You Begin
You must log in as a user with admin privileges to perform this task.
Procedure
Step 1
In the Navigation pane, click the
Admin
tab.
Step 2
On the
Admin
tab, click
Communications Services
.
Step 3
In the Communications Services pane, click the
SNMP
tab.
Step 4
Click on
Trap Destinations
tab.
Step 5
In the Trap Destinations area, you can perform one of the following:
•
Select an existing user from the table and click
Modify
.
•
Click
Add
to create a new user.
Note
If the fields are not highlighted, select
Enabled
.
Step 6
In the Trap Details dialog box, complete the following fields:
Trap Community String
field
The name of the SNMP community group used
for sending SNMP trap to other devices.
Enter a string up to 18 characters.
Note
This is only for SNMP v2c users.
System Contact
field
The system contact person responsible for the
SNMP implementation.
Enter a string up to 64 characters, such as an email
address or a name and telephone number.
System Location
field
The location of the host on which the SNMP agent
(server) runs.
Enter a string up to 64 characters.
Table 4-1
Fields to be updated to configure SNMP
Name
Description
