12-37
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Chapter 12 Configuring Interface Characteristics
Configuring the Cisco RPS 2300
Configuring the Cisco RPS 2300
You can configure and manage the Cisco Redundant Power System 2300, also known as the RPS 2300.
Follow these guidelines when configuring the RSP-2300:
•
The RPS name is a 16-character-maximum string.
•
On a Catalyst 3560-E or a standalone Catalyst 3750-E switch, the RPS name applies to the
connected RPS 2300.
•
In a switch stack, the RPS name applies to the RPS ports connected to the specified switch.
•
If you do not want the RPS 2300 to provide power to a switch, but do not want to disconnect the
RPS cable between the switch and the RPS 2300, use the
power rps
switch-number
port
rps-port-id
mode
standby
user EXEC command.
•
You can configure the priority of an RPS 2300 port from 1 to 6. Specifying a value of 1 assigns the
port and its connected devices the highest priority and specifying a value of 6 assigns the port and
its connected devices the lowest priority.
If multiple switches connected to the RPS 2300 need power, the RPS 2300 provides power to the
switches with the highest priority. If the RPS 2300 still has power available, it can then provide
power to the switches with lower priorities.
Beginning in user EXEC mode, follow these steps to configure and manage the RPS 2300:
Command
Purpose
Step 1
power rps
switch-number
name
{
string
|
serialnumber
}
Specify the name of the RPS 2300.
The keywords have these meanings:
•
switch-number
—Specify the stack member to
which the RPS 2300 is connected. The range
is 1 to 9, depending on the switch member
numbers in the stack. This keyword is supported
only on Catalyst 3750-E switches.
•
name
—Set the name of the RPS 2300 and enter
one of these options:
–
string
—Specify the name such as
port1
or
“port 1”
. Using quotation marks before and
after the name is optional, but you must use
quotation marks if you want to include
spaces in the port name. The name can have
up to 16 characters.
–
serialnumber
—Configure the switch to
use the RPS 2300 serial number as the
name.
Содержание Catalyst 3750-E Series
Страница 48: ...Contents xlviii Catalyst 3750 E and 3560 E Switch Software Configuration Guide OL 9775 08 ...
Страница 52: ...lii Catalyst 3750 E and 3560 E Switch Software Configuration Guide OL 9775 08 Preface ...
Страница 1414: ...Index IN 58 Catalyst 3750 E and 3560 E Switch Software Configuration Guide OL 9775 08 ...