Cisco Catalyst 3750-E Series, Руководство по настройке программного обеспечения

Страница: 1083 / 1414

40-105
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Chapter 40 Configuring IP Unicast Routing
Monitoring and Maintaining the IP Network
To remove the key chain, use the no key chain name-of-chain global configuration command.
Monitoring and Maintaining the IP Network
You can remove all contents of a particular cache, table, or database. You can also display specific
statistics. Use the privileged EXEC commands in
Table 40-17 to clear routes or display status:
Step 7 end Return to privileged EXEC mode.
Step 8
show key chain Display authentication key information.
Step 9 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Table 40-17 Commands to Clear IP Routes or Display Route Status
Command Purpose
clear ip route { network [ mask | * ]} Clear one or more routes from the IP routing table.
show ip protocols Display the parameters and state of the active routing protocol
process.
show ip route [ address [ mask ] [ longer-prefixes ]] |
[ protocol [ process-id ]]
Display the current state of the routing table.
show ip route summary Display the current state of the routing table in summary form.
show ip route supernets-only Display supernets.
show ip cache Display the routing table used to switch IP traffic.
show route-map [ map-name ] Display all route maps configured or only the one specified.