Cisco Catalyst 3750-E Series, Руководство по настройке программного обеспечения

Страница: 329 / 1414

10-45
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Configuring 802.1x Authentication
Switch(config-if)# dot1x port-control auto
Switch(config-if)# dot1x host-mode multi-domain
Switch(config-if)# switchport voice vlan 101
Switch(config-if)# end
Configuring Periodic Re-Authentication
You can enable periodic 802.1x client re-authentication and specify how often it occurs. If you do not
specify a time period before enabling re-authentication, the number of seconds between attempts is
3600.
Beginning in privileged EXEC mode, follow these steps to enable periodic re-authentication of the client
and to configure the number of seconds between re-authentication attempts. This procedure is optional.
Command Purpose
Step 1 configure terminal Enter global configuration mode.
Step 2 interface interface-id Specify the port to be configured, and enter interface configuration mode.
Step 3
authentication periodic
or
dot1x reauthentication
Enable periodic re-authentication of the client, which is disabled by
default.
Step 4
authentication timer {{[ inactivity |
reauthenticate ] [ server | am ]} { restart
value }}
or
dot1x timeout reauth-period { seconds |
server }
Set the number of seconds between re-authentication attempts.
The authentication timer keywords have these meanings:
• inactivity —Interval in seconds after which if there is no activity from
the client then it is unauthorized
•
reauthenticate —Time in seconds after which an automatic
re-authentication attempt is be initiated
• server am —Interval in seconds after which an attempt is made to
authenticate an unauthorized port
•
restart value —Interval in seconds after which an attempt is made to
authenticate an unauthorized port
The dot1x timeout reauth-period keywords have these meanings:
•
seconds —Sets the number of seconds from 1 to 65535; the default is
3600 seconds.
• server —Sets the number of seconds based on the value of the
Session-Timeout RADIUS attribute (Attribute[27]) and the
Termination-Action RADIUS attribute (Attribute [29]).
This command affects the behavior of the switch only if periodic
re-authentication is enabled.
Step 5 end Return to privileged EXEC mode.
Step 6
show authentication interface-id
or
show dot1x interface interface-id
Verify your entries.
Step 7 copy running-config startup-config (Optional) Save your entries in the configuration file.