manualshive.com logo in svg

Cisco Catalyst 3750-E Series, Руководство по настройке программного обеспечения

Продукт Cisco Catalyst 3750-E Series - это мощное оборудование для сетевой инфраструктуры. Для его настройки доступен бесплатный Software Configuration Manual на manualshive.com, где вы можете загрузить его на русском языке. Получите подробное руководство для настройки вашего устройства прямо сейчас!

Поделиться
Скачать
background image

 

5-12

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

OL-9775-08

Chapter 5      Managing Switch Stacks

Understanding Switch Stacks

To see if there are switches in VM mode, use the

 show switch

 user EXEC command. The port LEDs on 

switches in VM mode stay off. Pressing the Mode button does not change the LED mode.

You can use the 

boot auto-download-sw 

global configuration command to specify a URL pathname for 

the master switch to use to get an image in case of version mismatch.

Understanding Auto-Upgrade and Auto-Advise

When the software detects mismatched software and tries to upgrade the switch in VM mode, two 
software processes are involved: automatic upgrade and automatic advise.

  •

The automatic upgrade (auto-upgrade) process includes an auto-copy process and an auto-extract 
process. By default, auto-upgrade is enabled (the 

boot auto-copy-sw

 global configuration command 

is enabled). You can disable auto-upgrade by using the 

no boot auto-copy-sw

 global configuration 

command on the stack master. You can check the status of auto-upgrade by using the 

show boot

 

privileged EXEC command and by checking the 

Auto upgrade

 line in the display.

  –

Auto-copy automatically copies the software image running on any stack member to the switch 
in VM mode to upgrade (auto-upgrade) it. Auto-copy occurs if auto-upgrade is enabled, if there 
is enough flash memory in the switch in VM mode, and if the software image running on the 
switch stack is suitable for the switch in VM mode.

Note

A switch in VM mode might not run all released software. For example, new switch 
hardware is not recognized in earlier versions of software.

  –

Automatic extraction (auto-extract) occurs when the auto-upgrade process cannot find the 
appropriate software in the stack to copy to the switch in VM mode. In that case, the auto-extract 
process searches all switches in the stack, whether they are in VM mode or not, for the tar file 
needed to upgrade the switch stack or the switch in VM mode. The tar file can be in any flash 
file system in the switch stack (including the switch in VM mode). If a tar file suitable for the 
switch in VM mode is found, the process extracts the file and automatically upgrades that 
switch.

The auto-upgrade (auto-copy and auto-extract) processes wait for a few minutes after the 
mismatched software is detected before starting.

When the auto-upgrade process is complete, the switch that was in VM mode reloads and joins the 
stack as a fully functioning member. If you have both StackWise Plus cables connected during the 
reload, network downtime does not occur because the switch stack operates on two rings.

Note

Auto-upgrade performs the upgrade only when the two feature sets are the same type. For example, it 
does not automatically upgrade a switch in VM mode from IP services feature set to IP base feature set 
(or the reverse). 

  •

Automatic advise (auto-advise) occurs when the auto-upgrade process cannot find appropriate stack 
member software to copy to the switch in VM mode. This process tells you the command (

archive 

copy-sw

 or 

archive download-sw

 privileged EXEC command) and the image name (tar filename) 

needed to manually upgrade the switch stack or the switch in VM mode. The recommended image 
can be the running switch stack image or a tar file in any flash file system in the switch stack 
(including the switch in VM mode). If an appropriate image is not found in the stack flash file 
systems, the auto-advise process tells you to install new software on the switch stack. Auto-advise 
cannot be disabled, and there is no command to check its status.

Содержание Catalyst 3750-E Series







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 3750-E Series

PaloAlto Networks PA-5400 Series Quick Start Manual preview
PA-5400 Series
Бренд: PaloAlto Networks Страницы: 2
Salus PL07 Instruction Manual preview
PL07
Бренд: Salus Страницы: 16
TC Electronic ATAC Service Manual preview
ATAC
Бренд: TC Electronic Страницы: 55
Maxim DS5001FP Specification Sheet preview
DS5001FP
Бренд: Maxim Страницы: 26
NetComm 3GM1WN Quick Start Manual preview
3GM1WN
Бренд: NetComm Страницы: 3
iWave iW-RainboW-G30D Hardware User'S Manual preview
iW-RainboW-G30D
Бренд: iWave Страницы: 89
Vivotek FE9181-H Quick Installation Manual preview
FE9181-H
Бренд: Vivotek Страницы: 170
3Com Token Ring Getting Started Manual preview
Token Ring
Бренд: 3Com Страницы: 18
Supermicro SC836 X9 User Manual preview
SC836 X9
Бренд: Supermicro Страницы: 24
Phytec L-843e.A1 Hardware Manual preview
L-843e.A1
Бренд: Phytec Страницы: 53
ZyXEL Communications EOC350 Series Quick Start Manual preview
EOC350 Series
Бренд: ZyXEL Communications Страницы: 2
Dahua NVS0X04DH Quick Start Manual preview
NVS0X04DH
Бренд: Dahua Страницы: 24
EK-Quantum Kinetic FLT 80 D5/DDC Body User Manual preview
Kinetic FLT 80 D5/DDC Body
Бренд: EK-Quantum Страницы: 16
Avolites Titan One Quick Start Manual preview
Titan One
Бренд: Avolites Страницы: 24
ZyXEL Communications XGS4700 Series Manual preview
XGS4700 Series
Бренд: ZyXEL Communications Страницы: 485
AXIOMTEK eBOX532-100-FL Series Quick Installation Manual preview
eBOX532-100-FL Series
Бренд: AXIOMTEK Страницы: 2
ZyXEL Communications ZyAIR G-3000H User Manual preview
ZyAIR G-3000H
Бренд: ZyXEL Communications Страницы: 299
Juniper MX2010 Hardware Manual preview
MX2010
Бренд: Juniper Страницы: 825

Бренды по названию

Популярные бренды

Загрузить еще бренды