2-22
Administrator’s Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
OL-7995-01
Chapter 2 Installing the Cisco IPVC 3500 Series Gateway
Saving Configuration Settings
Setting Cisco IPVC 3544 Chassis Temperature Thresholds
In the System section of the Gateway interface, you can set critical and safe temperatures for the
Cisco IPVC 3544 chassis.
Procedure
Step 1
Launch the Gateway interface of the module installed in the top slot of the chassis.
Step 2
On the sidebar, click
System
.
Step 3
In the
High
field, enter a Celsius value for the critical temperature threshold.
We recommend that you set this critical threshold to 40°C.
The temperature LED lights red when the operating temperature inside the chassis rises above this value.
Step 4
In the
Low
field, enter a Celsius value for the safe temperature threshold.
We recommend that you set this safe threshold to 35°C.
When, after exceeding the critical threshold, the operating temperature of the chassis falls to this value,
the temperature LED lights green. During the temperature decent, the LED blinks green for the first 5°C
between the critical threshold and the safe threshold.
Step 5
Click
Upload
to save your changes.
Step 6
Click
Refresh
to refresh the Gateway interface System section.
Refreshing the System Section
You can refresh the information that appears in the System section of the Gateway interface to provide
the latest Cisco IPVC 3540 PRI Gateway status.
Procedure
Step 1
In the Gateway interface, make sure that
System
is selected on the sidebar.
Step 2
Click
Refresh
.
Saving Configuration Settings
You can save Cisco IPVC 3500 Series Gateway configuration settings to a file for use in restoring the
settings on the current or similar gateway. This file saves most of the current Board section settings and
all of the current Gateway section settings.
Note
For the Cisco IPVC 3544 chassis, you cannot save configuration settings in the System category.
Содержание 3521
Страница 137: ......