CI Systems ControlMaster SR-800R, Руководство по эксплуатации

Страница: 126 / 185

CI Systems SR-800R
6.2.39 GETBITERROR
Summary : Use this command to retrieve the current online BIT (Built-In Test)
Error Message Queue. This command can be used to query the system for
controller errors. As long as there are no BIT errors, the command responds with
the 'OK' string; otherwise a String FIFO Queue of the BIT Errors is outputted.
This, however, is done only on demand, that is, the error messages are queued in
the system until queried by the Host/User with the
GETBITERROR command.
Once all the stored messages in the queue have been retrieved, the command will
display the OK message. This message is displayed until there is a new BIT error
in the system.
Notes :
•
If a BIT error occurs, this means some serious problem has occurred with the
ControlMaster. It probably means that the Controller requires some attention
and that the temperature control mechanism has been turned Off.
•
The BIT Error Messages includes the error number that can be used for
troubleshooting (see Section
5.3 : Troubleshooting ).
•
The BIT Error Messages also includes system warning messages with their
message ID that can be used for troubleshooting
(see Section
5.3 : Troubleshooting ).
G E T B I T E R R O R
E
O
M
Return Values : BITStringValue - This string is usually the 'OK' String unless
there is a BIT Error. It then outputs the BIT Error Message.
6.2.40 DM
Summary : This command is used to set the Display Mode. This command is for
backward compatibility to the SR80. It is essentially a dummy command (NOP).
There is no need for this in the ControlMaster.
All the input values will have no
effect . It should not be used for new applications.
D M
S
pa
ce
nValve
E
O
M
Input Operand :
nValue - 1, 2, or 3.
605-7040 Operation Manual
Rev D
6-31
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com