Remote Operation
5-43
7.
IVCurve:IT
Description:
It sets the stored 128 dots current data in IV Curve Mode.
Syntax:
IVCurve:IT <NRf+>...< NRf+>
Example:
It sets the current table of IV Curve data.
IVCurve:IT <I1>,<I2>,...<I128>
Query Syntax:
IVCurve:IT?
Return Parameter: <NRf+>,...,<NRf+>
Query Example: IVCurve:IT?
Return Example:
<I1>,<I1>,...<I128>
Note
The execution time of this command is longer in Master/Slave mode. To
ensure normal operation, it is necessary to use the *OPC command. It will run
the next command after the *OPC command responded.
Ex.: IVC:VT xxx,xxx,xxx,...
*OPC?
8.
IVCurve:EDIT <NR1>
Description:
It selects the stored table to be set in IV Curve Mode. There are 100
storted tables (1~100) and the default is 1.
Syntax:
IVCurve:EDIT <NR1>
Example:
It sets the IV Curve stored table to 1.
IVCurve:EDIT 1
Query Syntax:
IVCurve:EDIT?
Return Parameter: <NR1>
Query Example: IVCurve:EDIT?
Return Example:
1
9.
IVCurve:SELect <NR1>
Description:
It selects the stored table to be run in IV Curve Mode. There are 100
storted tables (1~100) and the default is 1.
Syntax:
IVCurve:SELect <NR1>
Example:
It selets the IV Curve stored table to 1.
IVCurve:SELect 1
Query Syntax:
IVCurve:SELect?
Return Parameter: <NR1>
Query Example: IVCurve:SELect?
Return Example:
1
10. IVCurve:SEQuence:SELected
Description:
It selects the running sequence of IV_PROGRAM.
Syntax:
IVCurve:SEQuence:SELected <NR1>
Parameter:
1 to 100
Example:
IVC:SEQ:SEL 3
Query Syntax:
IVC:SEQuence:SELected?
Return Parameter: <NR1>
Query Example:
IVC:SEQ:SEL?
Return Example: 3
Note
Ensure the IV-Program has the sequence desired before selecting it. If not, use
PROG:ADD command to add a new Sequence.
