CatonCaster HD422 User Manual
Connector:
2x High density 15-pin D-sub, male
Impedance:
<100
Ω
Nominal Output Impedance
Max Output Level:
+24dBu @ 0dBFs
Adjustable down to +10dBu by 0.5dB steps.
Conditions For Measurements
≥
600
Ω
Load Impedance
–20dBFS encoded TS source
Output level is adjusted to +4 dBu @ -20 dBFS
THD+N:
< 0.015% from 20 Hz to 20khz @ +24dBu
Dynamic Range:
104dB
Signal to Noise:
80dB
Crosstalk:
< -80dB from 20Hz to 20kHz
Frequency Response:
±0.5dB 20Hz to 20kHz
Optional Breakout Cables:
4x XLR Breakout Cable (MRD_AUD_OPT_XLR)
4x BNC Breakout Cable (MRD_AUD_OPT_BNC)
1x Terminal Block (MRD_AUD_OPT_TERM)
SDI Embedded Audio Output -
Standards:
SMPTE 272M (for SD-SDI)
SMPTE 299 (for HD-SDI)
Density:
8 Audio Pairs
Sampling Frequency:
48 kHz
Ancillary Data Support
SDI VANC Data Types:
AFD (SMPTE 2016)
Closed Captions (CEA-708)
OP-47 (SMPTE RDD-08)
SMPTE RDD-11
TVG2X, AMOL-48/96 (SCTE-127)
Teletext/WSS/VPS (SMPTE-2031)
Time Code (SMPTE 12M-2)
SMPTE2038
Source ID
SCTE104 (SMPTE 2010)
VII (SMPTE RP-186)
SDI HANC Data Types:
Time Code (SMPTE 12M-2)
VBI Waveforms (SDI/Composite):
Line 21 Captions (CEA-608)
TVG2X, AMOL-48/96 (SCTE-127)
Teletext (EN300706)
WSS (EN300294)
VPS (EN300231))
Timecode in VBI (SMPTE 12M-1)
Synchronization with video :
Frame Accurate
Video Overlay Support
Closed Caption Overlays:
CEA-608, CEA-708, or SCTE-20
DVB-Subtitle Overlays:
HD/SD with Auto Scaling (EN 300743)
ASI Input and Output Features
General –
Connector:
2x BNC, Female
Impedance:
75
Ω
Return Loss:
≥
15dB, 3.5 to 270 MHz
ASI Serial TS Input / Output –
Number of ASI Inputs:
1 or 2 (rev j or later)
Number of ASI Outputs:
1 (non loop-through) or 2 (rev j or later)
Standard:
EN50083-9 (V2:3/98) DVB ASI
Data Bit Rate:
270 Mb/s
Maximum TS Rate:
200 Mb/s
Minimum TS Rate:
250 Kb/s
Packet Sizes
Input:188 and 204 bytes
Output: 188 bytes
Modes Supported:
Burst, Byte and Inverted
DVB-CI Descrambling Module Option
CAM Decryption –
Page of
97
107
www.catontechnology.com
July 2020 R1
