CatonCaster HD422 User Manual
4.2.15 Configuring Genlock
If the Genlock Reference option was selected as a factory installed option, the following menus and options
will be available for configuration. This menu allows the user to configure the genlock reference used by the
CatonCaster HD422. The CatonCaster HD422 can be configured to use an external user provided reference
or disabled completely.
Page of
45
107
www.catontechnology.com
July 2020 R1
Setting
Range
Description
Operational
Mode
Line Mode
RF Mode
Custom 1
Custom 0
Refer to Appendix E for explanation.
Processing
Mode
Downmix
Discrete
Refer to
Appendix
E for explanation.
Refer to Appendix F for explanation
Discrete
Channels
Lf/Rf
C/LFE
Ls/Rs
Ch1/Ch2
Ch3/Ch4
Ch5/Ch6
Ch7/Ch8
Selectable Pairs of Discrete Channels(Refer to
Appendix
F)
Dynamic Range Enabled
Disabled
Refer to Appendix E for explanation.
Downmix
Lo/Ro (Stereo)
Lt/Rt (Dolby Surround)
Lt/Rt (Auto)
Dual Mono
Dual Left
Dual Right
When the audio is downmixed in the CatonCaster
HD422 two audio channels are created. The channels
can be configured using the settings available in the drop
down menu. (Refer to Appendix E)
Dolby Format
Mode
Consumer
Professional
This option selects the Dolby Digital format mode. (Refer
to Appendix E)
Audio
Offset(ms):
-50 to +100 ms
This setting will adjust the audio output timing from -50
ms to +100 ms. This setting will affect all interfaces
configured to output this audio service.
DolbyE Offset:
None
Advance 1 Frame
This setting will adjust the audio output timing for if this
audio service is a DolbyE audio. Setting to
None
no
timing changes are made. Setting to
Advance 1 Frame
will advance the audio 1 frame. This setting will affect all
interfaces configured to output this audio service.
