CatonCaster HD422 User Manual
4.4.3 Configuring the Logs
The CatonCaster HD422 allows the user to configure alarms and events. Events and alarms can be hidden,
set to send SNMP traps or close a relay when active. In order to configure these options click the
button while in the
section of the tab. The
tab allows the user to configure the
alarms reported by the CatonCaster HD422. The
tab allows the user to configure the events reported
by the CatonCaster HD422. Each column and its function are described below. A user configured time offset
can also be applied to allow viewing the logs in a local time zone.
Page of
84
107
www.catontechnology.com
July 2020 R1
Title
Description
Severity
This column displays the nature of the alarm. The icon means the log entry is
informational and is not an error. The icon means the log entry is an active
alarm.
Timestamp
This column displays the date and time the error was raised or cleared. This date
and time correlates with the Date and Time settings configured in
Section
4.3.7.
Transition
This column displays when an alarm transition from a bad to good state. When
an error is raised the icon is displayed. When an error is cleared the icon
is displayed. When an event takes place the icon is displayed.
Message
This column displays the description of the error or event. The function or
hardware that experienced the event or error is described here.
Location
This column displays the hardware or function that experienced the alarm or
event.
