Caton CatonCaster HD422, Руководство пользователя

Страница: 93 / 107

CatonCaster HD422 User Manual
Page of 93 107 www.catontechnology.com July 2020 R1
Error Description
PID Filter Selection Not
Present Selected Service or PID is not present for inclusion in the output PID filter TS.
Power Supply Error Power is lost to one of the Redundant Power Supplies
RDD11 Overflow RDD11 data cannot fit into the VANC embedding line selected.
RTP Reception Error Uncorrectable out of order or duplicate packets are present in incoming IP
stream.
SCTE35 Heartbeat
Timeout The user settable time limit has been exceeded between SCTE35 messages.
ES Sync Error
Condition
Selected Audio PID Not
Present One of the in-use elementary streams is not synchronized to the PCR
PID Locked mode is set as service selection mode and audio PID defined by
user is not present in the incoming stream.
Selected PCR PID Not
Present PID Locked mode is set as service selection mode and PCR PID defined by user
is not present in the incoming stream.
Selected SCTE35 PID
Not Present PID Locked mode is set as service selection mode and SCTE35 PID defined by
user is not present in the incoming stream.
Selected Video PID
Not Present PID Locked mode is set as service selection mode and video PID defined by
user is not present in the incoming stream.
Service Not Found Service Lock service selection mode is enabled but service defined by user is not
present in the incoming stream.
Temperature Error The CatonCaster HD422 has detected the internal temperature is 60 degrees
Celsius or above.
Transport Error
Indicator The CatonCaster HD422 has detected that the transport stream error indicator is
present on the active input.
Transport Stream Not
Present The CatonCaster HD422 has detected that the transport stream from the active
input is no longer present.
TS Sync Loss Transport stream sync for IP stream is not detected.
Unicast Receiver Not
Found Error The CatonCaster HD422 cannot discover the destination for the unicast IP
stream within 10 seconds after the initial ARP is sent.
Unlicensed Modulation Input stream on active input is either 16APSK or 32APSK and the modulations
are no licensed on the CatonCaster HD422.
Unlicensed VCM/
Multistream Input stream on the active input contains a multistream signal and the
CatonCaster HD422 is not licensed for multistream.
Video Not Decoding The configured service or video PID to be decoded is not being successfully
decoded by the CatonCaster HD422.