CatonCaster HD422 User Manual
3.1 CatonCaster HD422 Front Panel Overview
The CatonCaster HD422 front panel allows the user to configure all settings that are present in the web
interface using the buttons located on the front of the unit. The screen below is the idle screen of the
CatonCaster HD422. This idle screen allows the user to view the incoming bitrate of the active input, which
input is set to active, the management IP address of the unit and the service currently set to decode.
1. Bitrate of incoming stream displayed in Mbps.
2. Current active input.
3. IP address of management port.
4. Current decoded service.
The following figure shows a typical screen on the front panel. Several important features have been circled
and noted below. These features are common to all screens and assist when navigating, viewing and editing
unit information. The
button allows the user to return to the home screen, cancel settings and go back a
menu. In order to edit a selected parameter the
button must be pressed. Once a parameter has been
changed the
button must be pressed again before the change takes effect on the unit.
1. Screen title.
2. Icons indicate which control buttons are currently valid for entry.
3. Cursor shows which line is active.
4. When editing, active character or item is highlighted.
Page of
18
107
www.catontechnology.com
July 2020 R1
