CatonCaster HD422 User Manual
4.2.9
Configuring DVB-CI Descrambling
This section will describe how to configure DVB-CI descrambling in the CatonCaster HD422. First, the user
will need to configure the CAM slots and descrambling mode. Once this is complete the user can configure
which services or PIDs to descramble.
4.2.9.1 Configuring DVB-CI Slots
This menu allows the user configure the DVB-CI slots in the CatonCaster HD422. The CatonCaster HD422
has two DVB-CI slots, a top and bottom, where CAM Modules can be inserted. Both slots are individually
configurable using the Bottom Slot and Top Slot tabs. CAM Modules can be reset manually using the
button. The
button opens the MMI (Man Machine Interface) for the CAM in the respective slot. MMI
support is dependent on what is supported by the CAM.
Page of
34
107
www.catontechnology.com
July 2020 R1
Setting
Range
Description
Frequency
(MHz)
42-1002
Selecting a channel from the channel dropdown will
populate this field automatically based on the user
selected channel. A user can manually select a
frequency if desired
Bandwidth
1.7 MHz
5 MHz
6 MHz
7 MHz
8 MHz
Selecting a channel from the channel dropdown will
populate this field automatically based on the user
selected channel plan. A user can manually select
channel bandwidth if desired.
PLP ID
Unique PLP ID used to select a particular stream within
the DVB-T2 or DVB-C2 input signal
Profile
Auto
Base
Lite
Select the DVB-T2 profile to use
Low RF Level
(dBmV)
-34 - +40
This is the Low RF Level threshold when the
Low Level
Alarm will be triggered in dBmV
Low MER (dB)
0 - 40
This is the Low MER threshold when the
Low MER
Alarm will be triggered in dB.
