CatonCaster HD422 User Manual
4.2.11 Configuring Service Selection
This menu allows the user to configure the PIDs or Service the CatonCaster HD422 will decode. Depending
on the Selection Mode that is set, the menu will change to reflect the applicable settings.
Service Lock
In Service Lock mode the CatonCaster HD422 is set to decode a specified service number or service name.
If the PIDs within the service change at any time, the CatonCaster HD422 will continue to decode the
service. The drag and drop method can be used to populate the Service Name or Service Number dialog
boxes.
Service Lock Selection Menu
Page of
38
107
www.catontechnology.com
July 2020 R1
Setting
Range
Description
Selection Mode Service Lock
PID Lock
Auto Seek
Setting to
Service Lock
sets the unit to decode any PIDs
associated with a service number or service name.
Setting to
PID Lock
sets the unit to decode only the PIDs
specified in the PID Lock Configuration matrix.
Auto
Seek
mode will tune the unit to the first service listed in
the PAT if a transport stream is present.
On Backup
Use Primary Service
Use Backup Service
Sets the service the CatonCaster HD422 will tune to in
case of an input failover. If
Use Primary Service
is
selected the CatonCaster HD422 will tune to the service
name specified in the Primary section. If
Use Backup
Service
is selected the service name specified in the
Backup section will be tuned. How the CatonCaster
HD422 fails over inputs is configured in
Section
4.2.1
