CatonCaster HD422 User Manual
If the CatonCaster HD422 contains a 58127 option card the unit can be configured to have an optional 2
nd
control port.
NOTE: Exercise extreme caution when performing changes to this menu as network communication
can be lost with the CatonCaster HD422.
The 2nd management port of the CatonCaster HD422 can be configured from the web interface. To make
changes to which port is the 2nd management port click, the configure control ports
button under the
Unit Network Configuration section.
Page of
73
107
www.catontechnology.com
July 2020 R1
Setting
Range
Description
Mode
DHCP
Static
Setting to
DHCP
will allow the network assign an IP
address automatically to the CatonCaster HD422 (if
supported). Setting to
Static
allows the user to manually
define all TCP/IP settings for the management port.
Hostname
Valid characters:
A through Z
0 through 9
- (hyphen)
This setting allows the user to define an optional unit
Hostname.
IP
Four decimal octets:
XXX.XXX.XXX.XXX
This option is only available if Static Mode is set. This is
the IP address assigned to the management port.
Subnet Mask
255.0.0.0 – 255.255.255.254 This option is only available if Static Mode is set. This is
the Subnet Mask assigned to the management port.
Gateway
Four decimal octets:
XXX.XXX.XXX.XXX
This option is only available if Static Mode is set. This is
the Gateway address assigned to the management port.
