Carrier Access Network Device Axxius 800, Руководство пользователя

Страница: 422 / 568

11-8 Axxius 800 - Release 2.2
Single Channel POTS Cards
Basic Configuration
Basic Configuration
WARNING!
D
O NOT INSTALL TWO
S
INGLE
C
HANNEL
POTS
SERVICE CARDS
WITH MODEM IN A
A
XXIUS CHASSIS
. I
F YOU DO
,
THE SYSTEM WILL HANG
. T
O
RESOLVE
,
YOU MUST REMOVE BOTH CARDS AND PLUG ONLY ONE BACK IN
.
Set Up the Single Channel POTS Line
Use the following commands to set up an analog port.
Set Up the Single Channel POTS Modem
Use the following commands to set up an analog port.
Command Description
set a:1:1 type voice
Set the DSO to voice. See
set (ds0)
for details.
connect a:1:1 8:1
Connect the DSO A:1:1 to port 1 of the Single
Channel POTS card in slot 8. See the set (fxsPS or
fxsPSM) command for details.
Assign this DS0 a phone line
Connect phone
Test phone for dial-tone
Command Description
Connect a phone line to
the Modem port
>atdt3032180000 Via HyperTerm call the line
(phone number)
MODEM>
Once a modem connection is made, the screen
will reflect this.