Carrier Access Network Device Axxius 800, Руководство пользователя

Страница: 121 / 568

Axxius 800 - Release 2.2 5-21
CLI Commands
add
add (router-lan) static ipx network
Use the add (router-lan) static ipx network command to add a static IPX network (route)
to the specified LAN interface.
Syntax:
add {tsr_lan-addr} static ipx network {network} {hops}
{ticks} {next-hop-mac-addr}
Example:
add 3:1 static ipx network 0x11 2 4 0x00e09700e9cd
The example will add a static IPX route to network 0x11, a hop count 2, a tick
count 4, a next hop Router at MAC address 00:e0:97:00:e9:cd.
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
{network}
The IPX network number in HEX (0x...). This number must be preceeded by 0x.
{hops}
The numeric value (of hops) indicating the distance from your Local (LAN) network to the
destination network.
{ticks}
The distance between two networks as measured in time increments (1/18th of a second).
Like hops, ticks may be used to designate primary and secondary routes to the same
network.
{next-hop-mac-addr}
The MAC address of the next hop Router, in the form a 6-octet HEX value separated by
colons, xxxxxxxxxxxx. This number must be preceeded by 0x.
slot Slot number (1-8) that contains the Router card.
port Port number of the Router.
"profile-name" The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.