Carlisle Ransburg DynaFlow 77376, Руководство по обслуживанию, Страница: 37 / 96

be selected.) Pushing the F3 button removes all items from
the selection list and allows the operator to make a new
selection. Pushing F2 will start the data acquisition graph
running. Each of the 4 graphed values will be plotted in
a different color. A legend at the top left and top right of
each of the two graphs indicate which value is which color.
(F1) Time Base – This button allows the user to switch the
time base (resolution) of the graph. In fast mode, the full
screen width is graphed in 45 seconds. In slow mode, the
full screen width is 90 seconds.
(F2) Single Plot – This button allows the user to record one
full screen of data (45 or 90 seconds) at which point the
graphing stops to allow the user to examine the data. In
continuous data mode, when the cursor reaches the right
end of the screen, it automatically jumps back to the left
and over writes the old data.
(F3) Stop Plot – This button allows the user to stop the data
acquisition process temporarily and freezes the display for
analysis or to save the plot to disk or memory stick.
(F5) Start Stop
ß
- This button allows the user
to move both the start-time cursor and the stop-time cursor
at the same time to the left.
(F6) Start Time
ß
- This button allows the user to move
the start-time cursor to the left.
(F7) Stop Time
ß
- This button allows the user to move
the stop-time cursor to the left.
(F8) Stop Time
à
- This button allows the user to move
the stop-time cursor to the right.
(F10) Save Plot – This button allows the user to save the
displayed pot to either the flash drive or hard drive of the
touchscreen or to a USB memory stick. It is saved in a
bitmap format (.bmp) so it can be printed on any standard
P.C. with a printer attached. The file is saved based on the
date and time it is saved in the following format…
File Name: AABBCCDD.bmp where…
AA = Month, BB = Day of Month, CC = Number of
hours since midnight, DD = Minutes since last hour.
Data Displays – At the top of the graphing screen there
may be as many as six white boxes with data in them.
The center two boxes indicate the time of the start and
stop cursors (start on top, stop on the bottom). The other
four boxes indicate the value of the graphed variable at the
point where the cursors are currently positioned.
JOB TOTALS (F7)
Calendar date/time data is not available from the Interface
Module and must be supplied by the Operator Interface or
host computer.
Daily Total
(For each JOB per CHANNEL)
Records accumulated total of all material through a CHAN-
NEL since last reset. Any time period associated with this
total is based on when it is reset. For example, if it is reset
after each rack or part, at the end of a shift, end of the day,
or end of day.
Yearly Total
(For each JOB per CHANNEL)
Records the accumulated total of all material through a
CHANNEL since last reset. Any time period associated
with this total is based on when it is reset. For example,
if it is reset at the end of a shift, end of the day, or end of
the year.
Calibration Total
(For each JOB per CHANNEL)
Records the accumulated total of all material through a
CHANNEL while in CALIBRATION MODE of operation
since last reset.
Grand Total
(For each JOB per CHANNEL)
Records the accumulated total of all material through a
CHANNEL, including while in CALI-BRATION MODE of
operation, since last reset. Any time period associated
with this total is based on when it is reset. For example,
if it is reset at the end of a shift, end of the day, or end of
the year.
Daily Total
(For all JOBs per CHANNEL)
Records the accumulated total of all material for all JOBs
through a CHANNEL since last reset. Any time period
associated with this total is based on when it is reset. For
example, if it is reset at the end of a shift, end of the day,
or end of the year.
Yearly Total
(For all JOBs per CHANNEL)
Records the accumulated total of all material for all JOBs
through a CHANNEL sincle last reset. Any time perior
associated with this total is based on when it is reset. for
example, if it is reset at the end of a shift, end of the day,
or end of the year.
Return To Contents
LN-9400-00-R11 (08/2018) 37 / 96 www.carlisleft.com
OPERATION