4
5
2-1 BASIC VT PARTS
VTs are basically formed from three major units:
1. Main body unit
2. Leg unit
3. Weapons unit
Some weapons units mount directly onto the main body unit,
while others work independently.
2-2 VT OPERATION SYSTEM
The VT operation is controlled with an OS known as the COOS. It
controls the balancer in the leg unit as well as the targeting
system for various weapons. Even if the VT type is the same, in
cases where the loaded OS is different the battlefield
performance is greatly reduced. The COOS, perfected through
numerous experiments as well as on the battlefield, is one of the
army’s greatest secrets. Pilots must be aware of this fact, and if
they eject during battle the VT must be destroyed to protect this
technology.
1-1 VT CONCEPT
The VT (Vertical Tank) has a short history and has only been used
as a weapon for the last eight years. However, due to the fact that
so many different organisations have started using the VT, it has
great potential as a military weapon.
Military development has become saturated, and due to arms
reduction, many military projects and unnecessary armies have
been cut. The VT, with its impressive firepower potential and
ability to be piloted by one person, will be used as a replacement
for armoured tanks, and will no doubt be the main weapon of
most organisations.
1-2 BASICS OF THE MILITARY USE VT
Until now, the VT has not been in general use as a military
weapon. It has been used experimentally in local conflicts only
twice. Currently, documentation concerning its
military use is not complete. In order for the VT to
reach its full potential, we must wait for research to
be completed. The VT’s military potential will
increase based upon the size and scope of future
conflicts. The VT will mainly be used as a powerful
heavy firepower weapon, and will be effective when
put into battle in mass numbers. One other major
point that must be considered is that the VT has not
been in use for as long, comparatively, as other
previous weapons/vehicles. Therefore in order to
maintain the VT’s military power, back-up
reinforcements will be invaluable.
1-3 DUTIES OF THE SPECIAL ARMOURED
UNIT
The role of the Panzer Unit that uses the VT as
military equipment will be to carry out extremely
important duties. In a mobile infantry battle, the
Armored Unit will be used to destroy the enemy,
capture key enemies, take over different enemy
encampments, and occupy and maintain areas. The
VT will mainly be used as a mobile platoon attacker
and counterattacking defensive unit. Also, since
time and topography are not a concern of the VT, it
will serve as a key unit when attacking areas with
problematic topography. The VT when used in
conjunction with mobile units (tanks) will increase
the firepower of the entire force. Sometimes it will
be used with air forces or sea forces in order to take
over key locations and when engaging in strategies
for attacking behind enemy lines.
1-4 SPECIAL PANZER DIVISION
FORMATION
A Panzer Division is formed of a command outpost,
3 VT battalions, 1 tank battalion, 1 artillery battalion,
1 recon battalion, 1 engineering battalion, 1
communications battalion, 1 anti-aircraft battalion, 1
air battalion, and 1 reinforcement battalion (see the
chart on the right). The reinforcement division is
composed of a supply battalion, a weapons
maintenance battalion, a transport battalion, and a
medic battalion. The VT battalion is composed of 4
VT companies. In each company there are 3 VT
platoons and 1 firearm support platoon (with 3
machines in each platoon). The firearm support
platoon is basically assigned a supportive role and
will never attack independently.
1-5 VT PLATOON OPERATION
One VT platoon is composed of 3 pilots who operate the small,
middle, and heavy classes of VTs. The VT type is chosen based on
the type of mission that has been assigned. Before a mission
begins, the pilot puts in his VT type request. VT transportation
and equipment for VT platoons come from the VT equipping
battalion and are shipped to the various companies which then
use transports to distribute the material to the various channels.
There are 3 VT repairmen (1 head repairman and 2 regular
repairmen) assigned to each VT. A commissioned chief equipment
officer is assigned based on VT type. He controls all equipment.
VT platoons are regularly dependent on company transports to
get equipment, but during emergency battle situations they rely
on division reinforcement supply battalions. Also, the weapons
maintenance battalion is in charge of large-scale operations such
as changing entire sets of parts.
SECTION 1. VT CONCEPT AND SPECIAL PANZER DIVISION
SECTION 2. VT SUMMARY
VT STRUCTURE DIAGRAM
Ball Joint Area (x axis)
x,y axis
z axis
x axis
x axis
Direction changes are driven by these parts
Ball Joint Area
Ball Joint Area
7th Special Panzer Division
32nd Special Armoured Battalion
33rd Special Armoured Battalion
34th Special Armoured Battalion
3rd Special Armoured Company
4th Special Armoured Company
5th Special Armoured Company
6th Special Armoured Company
‡VT Platoon
‡VT Platoon
‡VT Platoon
‡ Firearm Support
Platoon
Supply Battalion
Transport Battalion
Medic Battalion
Weapons Maintenance Battalion
80th Tank Battalion
Reconnaissance Battalion
Engineering Battalion
Anti-aircraft Battalion
Communications Battalion
Air Battalion
Artillery Battalion
Reinforcements
SPECIAL PANZER DIVISION FORMATION
Содержание STEEL BATTALLION
