Capcom STEEL BATTALLION, Руководство пользователя, Страница: 10 / 92

16 17
VT MONITOR
4-12 MAIN CAMERA CHANGE
The VT’s perspective is determined by the main camera. That
image is displayed within the cockpit. The camera is normally
facing front and centre. By pressing the
knob on the left pilot
stick , , or you can increase the amount of viewable
area. By pressing the control stick knob you can re-centre the
view on the direct centre of the VT. By using this and the VT’s sub-
monitor (described later) you will be able to move your VT,
improving its usefulness in battle.
4-13 MAIN CAMERA DUST AND DIRT
While in battle, you must be able to see clearly out of your main
screen. In any instance that the screen becomes grey with dust or
dirt, press the
washing button to clean it up.
CAMERA PERSPECTIVES
4-14 SUB MONITOR FUNCTIONS
By pressing the sub monitor mode select button under the main
monitor you can switch between four modes.
• Front View Mode
Shows what is directly in front of the VT. Use this view with
the site change function to view things more effectively.
• Back View Mode
Shows what is directly behind the VT. As with the front view,
by using this view with the site change function you can view
things more effectively.
• Lock-On View Mode
Used to zoom in on the locked on target. A target that is very
far away will be displayed in the sub monitor even without
zooming in.
• Sky View Mode
This view shows the VT from 50 metres above it. It is useful
for seeing blind spots and for looking around objects.
4-15 NIGHT VISION EQUIPMENT
A night vision scope has been loaded into the VT for use in low
light situations such as at night or in smoky environments. Use
the scope by pressing the
night scope button on the control
panel. The VT uses the Passive Type JGVS-V442 that projects
infrared light at a subject and then displays it in picture format
on the screen. The night vision scope can be used not only in
darkness and smoky areas, but also to help detect camouflaged
targets. The scope sights up to about 2.5 kilometres and the
display is shown on your normal monitor. When you are using the
scope in darkness, flashes in battle or from a flash grenade will
temporarily make the scope go black and you will be unable to
see.
JCS (Complete Command System)
4-16 JCS SUMMARY
JCS is a system that uses war strategy data and the most recent
information to increase the effectiveness of the VT to its
maximum. Its main purpose is to supply the latest information
concerning the battlefield, friendly forces, the enemy and other
companies/ battalions. This system is designed to increase the
overall effectiveness of the VT in battle. VT pilots as well as
platoon commanders must be able to use it effectively.
The JCS uses a network that runs from the VT transport command
room to the command rooms of the various
companies/battalions, so it helps carry the latest news back and
forth to the right people. This system sends messages from VT
video monitors, recon satellites, and other command divisions,
and edits the data in real time in the Battalion Command Rooms.
Then it analyses the data and sends it to the various platoons.
The various data is sent to the VT over a communications
network and is displayed within the various monitors in the
cockpit. Thanks to this system, pilots can check the map, enemy
locations, and manage support fire for the forces.
COMPLETE COMMAND SYSTEM
NETWORK SUMMARY CHART
VT Transport Command Centre VT
Recon Jet
Recon Satellite