Chapter 15
15-4
0000 The absence of the fixing web has been detected for
5 sec or more.
- Replace the fixing web.
- Replace the fixing web length sensor.
- Replace the DC controller PCB.
After correcting the fault, be user to reset the
fixing web counter reading.
(COPIER>COUNTER>MISC>FIX-WEB)
0001 At power-on, the connection of the web solenoid is
not detected.
- Check the connector for any fault in connection.
- Replace the solenoid.
0010 The power has been turned off and then back on
without resetting the error.
- Reset the fixing web counter.
(COPIER>COUNTER>MISC>FIX-WEB)
E010
There is a feed motor error.
0000 The FG signal of the feed motor does not arrive for
2 sec or more even when the feed motor has been
turned on.
- Check the connector for any fault in connection.
- Replace the motor
E012
There is a drum motor error.
0000 The FG signal of the drum motor does snot arrive
for 2 sec or more even when the drum motor has
been turned on.
- Check the connector for any fault in connection.
- Replace the motor.
E013
The waste toner pipe is clogged.
0000 The waste toner pipe is identified as being clogged
for 4 sec or more.
- Check the connector for any fault in connection.
- Replace the waste toner feedscrew lock
detecting switch.
- Replace the waste toner feed unit.
- Replace the DC controller PCB.
E014
There is a fixing motor error.
0000 The PULL lock signal of the fixing motor does not
arrive for 2 sec even when the fixing motor has
been turned on.
- Check the connector for any fault in connection.
- Replace the motor.
E020
There is no toner in the developing assembly; there is an error in the detection of developing toner
sensor connection; there is an error in the detection of hopper toner sensor connection
0000 The presence of toner is detected inside the sub
hopper and, in addition, the absence of toner is
detected inside developing assembly for 120 sec
continuously even when operation has been under
way for the supply of toner to the developing
assembly.
- Check the connector of the developing toner
sensor for any fault in connection.
- Replace the developing toner sensor.
- Replace the hopper toner sensor.
0001 At power-on, the connection of the developing
assembly toner sensor is not detected.
- Check the connector for any fault in connection.
- Replace the sensor.
0002 At power-on, the connection of the developing
hopper toner sensor is not detected.
- Replace the connector for any fault in
connection.
- Replace the sensor.
E025
There is a toner feed motor over-current detection error, there is a toner bottle motor connection
detection error.
0001 An over-current has been detected in the toner feed
motor.
- Check the connector for any fault in connection.
- Replace the motor.
0002 An over-current has been detected in the toner
bottle motor.
- Check the connector for any fault in connection.
- Replace the motor.
0003 At power-on, the connection of the toner bottle
motor is not detected.
- Check the connector for any fault in connection.
- Replace the motor.
E032
The NE controller counter has malfunctioned.
0001 An open circuit has been detected for the count
pulse signal.
Turn off the main power, and check for an open
circuit in the cable; then, turn the main power
back on.
E061
There is a potential control error/there is an APC error.
0001 As a result of potential control, the drum surface
potential (VL2) of the background is 200 V or
higher (i.e., causing a solid black image).
- Replace the potential sensor unit.
- Replace the laser scanner unit.
- Replace the DC controller PCB.
0002 The primary charging output used at time of printer
output and the drum surface potential after laser
output is identified as being 200 V or more (i.e.,
causing a solid black image).
E100
There is a BD error.
0001 A check is made of VLOCK at intervals of 100
msec while the laser is on. An error will be
identified if it is not detected 10 times in sequence.
- Replace the laser scanner unit.
- Replace the DC controller PCB.
E110
There is a polygon motor error.
Code
Description
Remedy
Содержание iR5570 Series
