Canon iR5570 Series Скачать руководство пользователя страница 251

Страница: 251 / 684

Chapter 7

7-53

Mount the blade by reversing the steps used to remove it.

1) Push the blade mounting base against the developing assembly, and

tighten the two mounting screws.

When mounting the blade, place paper on the developing cylinder first

to protect the developing cylinder.

7.10.15 Transfer/Separation Charging Assembly

7.10.15.1 Removing the Transfer/Separation Charging

Assembly

0009-5631

1) Turn the fixing feeder assembly release lever [1] in the direction of

the arrow (left) to release the transfer/separation charging assembly.

Slide out the fixing feeder unit [2] to the front.

F-7-185

2) Detach the feeder assembly front cover (Right) [2] using the two

screws [1].

F-7-186

3) Remove the screw [1] and the fixture [2], and then remove the

connector [3].

F-7-187

4) Pushing the front and the rear of the transfer/separation charging

assembly, pull out the assembly to the front and remove it in the

direction of upper left.

F-7-188

Be aware not to cut the nylon wire by coming into contact the transfer/

separation charging assembly to the transfer guide.

7.10.15.2 Mounting the Transfer/Separation Charging

Assembly

0009-5633

Mount the transfer/separation charging assembly by reversing the steps

used to remove it while keeping the following in mind.

1) Make sure that the four protrusions [1] on the transfer/separation

charging assembly are correctly fitted into the cut-offs [2] in the

fixing/feeding unit.

2) Make sure that the leaf spring [3] of the fixing/feeding unit comes in

contact with the frame of the transfer/separation charging assembly

(slide from the front).

F-7-189

[1]

[2]

[1]

[2]

[1]

[2]

[3]

[1]

Содержание iR5570 Series













































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание iR5570 Series

Отзывы:

Похожие инструкции для iR5570 Series

Бренды по названию

Популярные бренды

Canon iR5570 Series, Руководство по обслуживанию

Результаты поиска

Содержание iR5570 Series

Отзывы:

Похожие инструкции для iR5570 Series

Бренды по названию

Популярные бренды