Canon iR5570 Series, Руководство по обслуживанию

Страница: 503 / 684

Chapter 13
13-31
F-13-65
[1] Feeding roller
[2] Separation roller
[3] Pressure lever
[4] Pressure spring
13.8.5 Adjusting the Pressure of the Separation
Roller of the Manual Feed Tray
0009-5528
If double feeding or pickup failure occurs during pickup, adjust the
position of the pres-sure spring of the separation roller.
1) Remove the right upper cover.
2) Remove the upper guide [1].
F-13-66
- If double feeding occurs, remove the mounting screw [1], and lower
the mounting base [2]; then, tighten the mounting screw [1] in hole
A.
- If pickup failure occurs, remove the mounting screw [1], and raise the
mounting base [2]; then, tighten the mounting screw [1] in hole B.
F-13-67
13.8.6 Adjusting the Position of the Pickup Solenoid
(SL3, SL4) of the Cassette 3/4
0009-5532
Adjust the position of the solenoid using the two screws [3] so that the
distance from the bottom of the pickup assembly to A of the roller arm
is 36-/+0.5 mm when [1] and [2] are op-erated.
F-13-68
13.8.7 Adjusting the Position of the Delivery Flapper
Solenoid (SL5)
0009-5535
Adjust the position of the mounting screw [2] using the screw [2] so that
the drive lever [1] is pushed fully when the solenoid turns on (i.e., when
the plunger is drawn).
F-13-69
13.8.8 Adjusting the Position of the Right Deck
Pickup Solenoid (SL6)
0009-5536
Adjust the position of the solenoid so that the left edge of the arm 2 is
57.2 -/+0.5 mm from the center of hole A of the solenoid mounting base.
F-13-70
13.8.9 Adjusting the Position of the Left Deck Pickup
Solenoid (SL7)
0009-5537
Before removing the left deck pickup solenoid from the support plate
[1], take note of its position with reference to the fixing screw [2] of the
[1]
[2]
A
B
[3]
[4]
[1]
[1]
[2]
hole A
hole B
[1] [2]
[1]
[2]
A
A
36
0.5mm
[3]
[2]
[1]
[A]
57.2 0.5mm