Canon iPF8400SE imagePROGRAF, Руководство пользователя

Страница: 613 / 650

Cause Corrective Action
You tried to print a test pattern for printer ad-
justment on several sheets, but sheets of dif-
ferent types of paper were used. When printing a test pattern for adjustment, use sheets of the same type of paper, in
the required quantity. Replace the paper as follows and perform adjustment again.
1.
Lift the Release Lever and stop printing.
2.
Replace the paper.
(See "Loading and Printing on Sheets.")
➔
P.21
3.
Execute adjustment again from the control panel menu.
When Detect Mismatch in the Control Panel
menu is set to Warning , the type of paper
loaded does not match the type specified in
the printer driver.
You can continue to print, but note that this error may cause paper jams or problems
in the printing results.
The paper is too small. The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause , paper smaller than the
size specified in the printer driver is loaded.
Press ▲ or ▼ to select Print , and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the
printer as follows.
1. Press ▲ or ▼ to select Stop Printing , and then press the OK button.
2. Change the paper size setting in the printer driver to the size loaded in the print-
er and try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the
printer driver as follows.
1.
Press ▲ or ▼ to select Change Paper , and then press the OK button to stop
printing.
2.
Replace the loaded paper to match the settings in the printer driver and try print-
ing again.
(See "Loading and Printing on Rolls.")
➔
P.18
(See "Loading and Printing on Sheets.")
➔
P.21
When Detect Mismatch in the Control Panel
menu is set to Warning , paper smaller than
the size specified in the printer driver is loa-
ded.
You can continue to print, but note that this error may cause problems in the print-
ing results.
The paper is too small.
The paper is too small.
" Replace paper with A4/LTR (vertical) or larger "
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.) Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper , press the OK button, and remove the
paper.
(See "Removing Sheets.")
➔
P.365
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
➔
P.21
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
" Replace roll with 10 in. wide or larger roll. "
Cause Corrective Action
The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows.
1. Press ▲ or ▼ to select Change Paper , and then press the OK button.
iPF8400SE The paper is too small.
User's Guide
Error Message
Messages regarding paper
613