manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 849 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 849

Chapter 17

17-5

F-17-9

17.1.7 Ending Service Mode(iR105)

0007-0323

iR105

- Press the Reset key once to return to the Service Mode Initial screen (F00-102-01).

- Press the Reset key twice to leave service mode and return to the User screen (Standard screen).

If you used service mode (ADJUST, FUNCTION, OPTION), be sure to turn off and then on the main power switch after leaving service mode.

17.1.8 Exiting service modes

0008-7888

iR105i/iR105+ / iR9070 / iR85+ / iR8070

When the reset key is pressed once, the display returns to the service mode initial screen.

When the reset key is pressed twice, the service modes are exited, and the display returns to the user screen (standard screen).

When using the ADJUST, FUNCTION or OPTION service mode, be sure to turn the main power switch ON/OFF after exiting the mode.

17.1.9 Backing Up Service Mode

0007-0324

iR105i/iR105+ / iR9070 / iR8070

At time of shipment from the factory, each machine is adjusted, and the adjustment values are recorded on the Service Label (attached to the cover of the

Service Book case behind the front cover).

If you have replaced the reader controller PCB, DC controller PCB (or if you have cleared the RAM of these), the ADJUST and OPTION settings will be

replaced by default settings.

If you have made adjustments in the field and changed service mode settings, be sure to print out the Service Label and store it away

(COPIER>FUNCTION>MISC-P>LBL-PRINT). If the label lacks items, use its margin.

You can also print out a complete list of service mode settings: COPIER>ADJUST/OPTION/COUNTER; COPIER>FUNCTION>MISC-P>P-PRINT.

COPIER

SORTER

SORTER

   Displayed only when the finisher is attached.

BOARD

Option board service modes

   Displayed only when an option board is 
   attached.

Main body service modes

Sorter/finisher service modes

(There are no modes for the sorter, 
so                     isn’t displayed even 
when the sorter is attached.)

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов