Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 151 / 1122

Chapter 2
2-49
4) Put paper in the deck.
5) Slide the deck inside the machine.
6) Peel off the appropriate deck size label [1] from the size label liner
(cassette/deck), and attach it on the paper size plate of the deck.
F-2-201
7) Start service mode, and register the paper size of the front deck.
MEMO
Right deck : COPIER>OPTION>CST>P-SZ-C1
Left deck : COPIER>OPTION>CST>P-SZ-C2
A4=6, B5=15, LTR=18
8) Thereafter, turn off the main power switch.
Points to Note When Turning Off the Main Power Switch
1. Hold down the control panel power switch for 3 sec or more.
2. Go through the instructions for the shut-down sequence shown on
the display so that the main power switch may be turned off.
3. Turn off the main power switch.
9) Turn on the main power switch.
2.2.45 Changing the Paper Size for the Front Deck
(right, left)
0007-2612
/ iR8070
1) Press the release button, and slide out the deck.
2) Remove the screw [1] of the rear end guide plate [2], and secure the
guide plate [2] to the desired position.
F-2-202
3) Remove the screw [1] (1 pc. each) from the left and right of the guide
plate [2], and secure the guide plate [2] to the desired position.
F-2-203
4) Put paper in the deck.
5) Slide the deck inside the copier.
6) Peel off the appropriate deck size label [1] from the size label liner
(cassette/deck), and attach it on the paper size plate of the deck.
F-2-204
7) Start service mode, and register the paper size of the front deck.
MEMO
Right deck : COPIER>OPTION>CST>P-SZ-C1
Left deck : COPIER>OPTION>CST>P-SZ-C2
A4=6, B5=15, LTR=18
8) Thereafter, turn off the main power switch.
Points to Note When Turning Off the Main Power Switch
1. Hold down the control panel power switch for 3 sec or more.
2. Go through the instructions for the shut-down sequence shown on
the display so that the main power switch may be turned off.
3. Turn off the main power switch.
9) Turn on the main power switch.
2.2.46 If Not Connected to a Network
0008-3484
iR105i/iR105+ / iR9070
Reference
If the machine is not connected to a network, its control panel will
indicate the message "Check the Connection to the Network." To
disable the message, turn off the following user mode item:
system setup>network>Ethernet driver setup>auto detect
2.2.47 If Not Connected to a Network
0008-3806
/ iR85+
Reference
If the machine is not connected to a network, its control panel will
indicate the message "Check the Connection to the Network." To
disable the message, turn off the following user mode item:
system setup>network>Ethernet driver setup>auto detect
[1]
[2]
[1]
[2]
[1]
[1]