manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 386 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 386

Chapter 8  

8-46

indicated.

F-8-87

4) Apply toner on the cleaning blade where it comes into contact with

the photosensitive drum; then, mount the cleaning blade.

Caution:

When mounting the cleaning blade, be sure to put the blade auxiliary

plate between the blade support plate and the blade back plate.

Caution:

After mounting the cleaning blade, turn the drum; if toner slips off the

cleaning blade at this time, repeat the foregoing

steps.

If the problem is not corrected after tightening the screws, replace the

cleaning blade.

F-8-88

8.9.6.6 Mounting the Cleaning Blade

0007-2694

iR105i/iR105+ / iR9070

See "Maintenance and Inspection".

8.9.6.7 Removing the Blade Vibrating Unit

0007-2695

iR105i/iR105+ / iR9070

1) Remove the blade unit.

2) Disconnect the connector [1], and remove the 2 screws [2]; then,

detach the blade vibrating unit [3].

(The rear and front blade vibrating units may be disassembled in the

same way.)

F-8-89

8.9.7 Photosensitive Drum Heater

8.9.7.1 Replacing the Photosensitive Drum Heater

0007-2047

iR105i/iR105+ / iR9070 / iR85+ / iR8070

1) Remove the photosensitive drum from the main body.

2) Remove the two mounting screws [1], and detach the flange [2] at the

front; then, disconnect the connector [3].

F-8-90

3) Pull out the flange at the rear [4], and detach the power supply unit

[5] from the photosensitive drum.

F-8-91

4) Pull out the flat heater (drum heater) [6] from inside the drum

cylinder.

Blade support plate

Blade auxiliary plate

Blade back plate

[2]

[1]

[3]

[3]

[1]

[2]

[3]

[4]

[5]

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов