Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 681

Страница: 681 / 1122

Chapter 14

14-27

14.3.9 Points to Note When Replacing the reader

controller PCB

0008-3977

iR105i/iR105+ / iR9070

1) Execute the following two items in service mode to print out settings

stored under items: COPIER> FUNCTION> MISC-P> LBL-PRNT

and COPIER> FUNCTION> MISCP> USER-PRT.

2) Check to make sure that the Execute/Memory lamp in the control

panel is OFF, and turn off the main power switch.

3) Disconnect the power plug from the power outlet.

The machine remains powered as long as the power plug is connected.

Be sure to disconnect the power plug from the wall outlet.

4) Replace the reader controller PCB.

5) Assemble the machine, and connect the power plug to the power

outlet; then, turn on the main power switch.

6) Execute the following in service mode: COPIER> FUNCTION>

CLEAR> R-CON.

7) Turn off and then on the main power switch.

8) Execute the following in service mode: COPIER> FUNCTION>

CCD> CCD-ADJ.

9) Enter the settings printed out in step 1) for the following:

- service mode

COPIER> ADJUST> ADJ-XY (4 items)

COPIER> ADJUST> LAMP (1 item)

COPIER> ADJUST> CCD (29 items)

- user mode

10) Turn off and then on the main power switch, and execute the

following in service mode

to generate a service label; keep the service label in the service book

case: COPIER> FUNCTION> MISC-P> LBL-PRNT.

14.3.10 When Replacing the Reader Controller PCB

0008-8449

1) Execute the following in service mode to generate the setting of each

item: COPIER, FUNCTION>MISC-P>LBL-PRNT and

COPIER>FUNCTION>MISC-P>USER-PRT.

2) Check to make sure that that Execute/Memory lamp in the control

panel are OFF, and turn off the main power switch.

3) Disconnect the power plug from the power outlet.

The machine remains supplied with power as long as its power plug is

connected to a power outlet even when its main power switch is turned

off. Be sure to disconnect the power plug.

4) Replace the reader controller PCB.

5) After assembling the machine, connect the power plug to the power

outlet, and turn on the main power switch.

6) Execute the following in service mode:

COPIER>FUNCTION>CLEAR>

R-CON

7) Turn on and then off the main power switch.

8) Execute the following in service mode:

COPIER>FUNCTION>CCD>

CCD-ADJ

9) Enter the setting of each item generated in step 1):

- Service Mode

COPIER>ADJUST>ADJ-XY (4 items)

COPIER>ADJUST>LAMP (1 item)

COPIER>ADJUST>CCD (29 items)

- User Mode

10) Turn off and then on the main power switch, and execute

COPIER>FUNCTION>MISC-P>LBL-PRNT in service mode to

generate a service label. Then, store it in the service book case.

14.3.11 When Replacing the Reder controller PCB

0008-8451

/ iR8070

1) Print out the data of user mode/service mode.

2) Check to make sure that the Execute/Memory lamp in the control

panel ore OFF, and turn off the main power switch.

3) Disconnect the power plug from the power outlet.

The machine remains supplied with power as long as its power plug is

connected to a power outlet even when is main power switch is turned

off.

Be sure to disconnect the power plug.

4) Replace the reader controller PCB.

5) Remove the EEPROM (1 pc.) from the existing PCB, and mount it to

the new PCB.

6) After assembling the machine, connect the power plug to the power

outlet, and turn on the main power switch.

7) Check to make sure that the following service mode settings are the

same as the data before replacement:

COPIER>ADJUST>AE>all items

COPIER>ADJUST>ADJ-XY>all items

COPIER>ADJUST>CCD>all items

If any service mode setting is faulty, enter the respective setting

recorded on the service label in service mode.

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ImageRunner iR8500 Series

Отзывы:

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 681 / 1122

Результаты поиска

Содержание ImageRunner iR8500 Series

Отзывы: