manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 253 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 253

Chapter 5

5-1

5.1 Construction

5.1.1 Outline of the Original Exposure System(iR105)

0006-9374

iR105

The major changes made to the original exposure system are as follows:

- Enlargement/Reproduction

- 4-channel high-speed reading CCD (see discussions of image processing system)

- CCD adjustment (see discussions of image processing system)

- PCB arrangement

- ADF mechanism (new)

For others, see T02-202-01 for a table of differences.

T-5-1

5.1.2 Outline

0006-9406

iR105i/iR105+ / iR9070

Table shows the major functions of the original exposure system.

T-5-2

Unit/
location

Change from 
GP605 (iR600)

Purpose of 
change

Remarks

Reference

Reading 
method

Changed the scanning 
speed at 100 % to 450 
mm/sec.

To support higher 
speed of operation.

In the GP605 
(iR600), 260 mm/
sec.

2.3 Enlargement/
Reduction

Used digital 
enlargement/reduction 
(between 25 % and 400 
%).

To support higher 
speed of operation.

In the GP605 
(iR600), scanner 
enlargement/
reduction only.

2.3 Enlargement/
Reduction

Reader unit

Added a scanner motor 
fan.

To prevent 
overheating of the 
scanner motor.

2.4 Preventing 
Overheating of the 
Scanner Motor

Added a transformer 
PCB.

To ensure stable 
inverter power.

2.6 Stabilizing the 
Scanning Lamp

Reader 
controller

Located the reader 
controller PCB where 
the image processor 
PCB was found.

2.5 Arrangement 
of PCBs

Added a dust detection 
mechanism.

To prevent image 
faults.

2.8 Dust Detection 
Function in stream 
reading

ADF

Added open/closed 
detection to the ADF.

To prevent wrong 
detection.

2.7 Detecting the 
State (open/
closed) of the ADF

Item

Description

Original illumination

Illumination by a fluorescent lamp

Original scanning

Book mode: scanning by the No. 1 mirror mount
ADF mode (one-side reading): scanning by stream reading (2 
fixed points
of small-size reading and large-size reading)
ADF mode (double-sided reading): scanning by the No. 1 mirror 
mount

Scanner position
detection

By a scanner home position sensor (PS1)
By an image leading edge sensor (PS3)

Enlargement/reduction

Main scanning direction: images are processed by a line memory
Sub scanning direction: No. 1 mirror mount is moved at different 
speeds

Scanner drive control

No. 1 mirror mount: pulse control by a stepping motor (M5)
Lens mount: fixed in position

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов