manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 150 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 150

Chapter 2  

2-48

interleaf mode or otherwise is a high copy volume user, change the

following service mode settings:

   COPIER>OPTION>BODY>TEMP-TBL (Level 2)"5"(Default)->"0"

MEMO:

Starting Service Mode (Level 2)

-Press the Additional Function key.

-Press the 2 and 8 keys on the keypad at the same time.

-Press the Additional Function key.

 Press the Additional Function key and the 2 key in succession.

29) Clean up the area around the copier.

30) Move the copier to its final location, and secure it in place using the

adjusters.

31) If you are installing options, do so by referring to the Installation

Procedure that comes with each option.

MEMO

For the Card Reader-D1, see "Installing the Card Reader-D1."

32) Fill out the Service Sheet.

2.2.43 Changing the Paper Size for the Front Deck 

(right, left)

0007-6745

iR105i/iR105+ / iR9070

1) Press the release button, and slide out the deck.

2) Remove the screw [1] of the rear end guide plate [2], and secure the

guide plate [2] to the desired position.

F-2-196

3) Remove the screw [1] (1 pc. each) from the left and right of the guide

plate [2], and secure the guide plate [2] to the desired position.

F-2-197

4) Put paper in the deck.

5) Slide the deck inside the copier.

6) Peel off the appropriate deck size label [1] from the size label liner

(cassette/deck), and attach it on the paper size plate of the deck.

F-2-198

7) Start service mode, and register the paper size of the front deck.

MEMO

Right deck : COPIER>OPTION>CST>P-SZ-C1

Left deck : COPIER>OPTION>CST>P-SZ-C2

A4=6,B5=15,LTR=18

8) Thereafter, turn off the main power switch.

Points to Note When Turning Off the Main Power Switch

1. Hold down the control panel power switch for 3 sec or more.

2. Go through the instructions for the shut-down sequence shown on

the display so that  the main power switch may be turned off.

3. Turn off the main power switch.

9) Turn on the main power switch.

2.2.44 Changing the Paper Size for the Front Deck 

(right, left)

0007-3519

 / iR85+

1) Press the release button, and slide out the deck.

2) Remove the screw [1] of the rear end guide plate [2], and secure the

guide plate [2] to the desired position.

F-2-199

3) Remove the screw [1] (1 pc. each) from the left and right of the guide

plate [2], and secure the guide plate [2] to the desired position.

F-2-200

[2]

[1]

[2]

[1]

[1]

[2]

[1]

[2]

[1]

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов