manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 118 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 118

Chapter 2  

2-16

F-2-36

6) Holding the grips on the delivery side (front, rear) of the machine, lift

the machine slightly to remove the remaining pad [1] and the plastic

bag at the same time.

F-2-37

7) Shift up the 2 adjusters [1] (front) found on the bottom for the

machine, and check that they are unlocked.

F-2-38

8) Take out the 2 slope plates [2] from the middle of the skid [1].

F-2-39

9) Remove the 2 pins [2] taped in place to the slope plate [1].

   Turn over the slope plate [1], and fit the pin [2] (1 pc. each) while

matching the pin holes in the skid and the pin hole in the slope plate.

   Holding the grips (front, rear) on the delivery side of the machine, slide

the machine along the slope plates, then off the skid.

F-2-40

10) Take out the parts and attachments from the cardboard box that

comes with the machine; then, check to make sure that none of the

foregoing items is missing.

11) Open the left and right protrusions [1] of the grip you fitted in step

4) using a screwdriver [3]; then, detach the grip [1].

[1]

[1]

[1]

[2]

[1]

[2]

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов