manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 692 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 692

Chapter 14  

14-38

F-14-83

8) Connect the cable [1] of the potential sensor checking electrode to the

frame (GND) [2] of the machine.

Be sure to allow enough space from the sensor window so that the clip

will never come into contact with the sensor cover.

F-14-84

9) Fit the door switch actuator into the door switch assembly.

10) Turn on the power switch.

After turning on the power switch, do not touch the potential sensor

assembly.

11) Make the following selections in service mode, and check to see that

the reading for initial rotation is between 0 and 30:

COPIER>DISPLAY>DPOT>DPOT-K.

MEMO:

1. If the reading in method 1 is as indicated but the reading in method 2

is not as indicated,

Suspect dirt on the sensor or a fault in the potential measurement unit.

2. If the readings in both methods 1 and 2 are as indicated,

It is safe to assume that the operation and the signal path from the

potential sensor unit to the microprocessor on the DC controller PCB are

normal.

12) Turn off the power switch.

13) Detach the potential sensor checking electrode.

14) Mount the potential sensor support plate.

15) Turn on the power switch.

14.7.14 When Replacing the Potential Sensor/

Potential Control PCB

0007-0705

iR105i/iR105+ / iR9070

1) Check to make sure that the Execute/Memory lamp in the control

panel is OFF, and turn off the main power switch.

2) Disconnect the power plug from the power outlet.

The machine remains powered after the main power switch is turned off

as long as the power plug is connected to the power outlet. Be sure to

disconnect the power plug from the power outlet.

3) Replace the potential sensor/potential control PCB.

The potential sensor and the potential control PCB are adjusted as a pair.

Be sure to replace them at the same time.

4) Remove the developing assembly, and slide out the process unit.

5) Disconnect the connector [1] of the potential sensor.

F-14-85

6) Remove the 2 screws [1], and detach the potential sensor support

plate [2].

F-14-86

7) Put back the developing assembly and the process unit.

8) Connect the connector [1] of the potential sensor.

F-14-87

[1]

[2]

[1]

[2]

[1]

[2]

[1]

[1]

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов