manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 641 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 641

Chapter 13

13-49

F-13-56

While keeping the blade down with the plate, tighten the screws temporarily.

- From 6 to 10, tighten fully.

13) Apply toner in the area of the cleaning blade that will come into contact with the photosensitive drum; then, mount the blade.

F-13-57

When mounting the cleaning blade, be sure to put the blade auxiliary plate between the blade support plate and the blade back plate.

After mounting the cleaning blade, turn the drum; if toner slides off the cleaning blade as a result, repeat the foregoing step.

If the problem is not corrected, replace the cleaning blade.

13.3.12 Points to Note for Scheduled Servicing Work

0007-0550

iR105i/iR105+ / iR9070

- Be sure to check the block (front, rear) for melting, thermal deformation, cracking, or discoloration caused by leakage. If found, be sure to replace it with

a new one without delay.

- Be sure to check and clean the block (front, rear) thoroughly (all the way to its inside).

- Never use a cloth carrying any metal powder.

- Unless specifically indicated, do not use a moist cloth. Use lint-free paper to dry wipe, and use alcohol thereafter. Be sure that the alcohol has completely

evaporated before fitting the part back into the machine.

- Be sure to provide scheduled servicing and replace periodically replaced parts at specific intervals.

10

5

8
3

7
1

9
2

6
4

Blade support plate

Blade back plate

Blade auxiliary

Blade back plate

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов