Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 1000 / 1122

Chapter 17
17-156
MF-LG-ST Setting the long mode key
2
<Setting value>
0: Ordinary [Default]
1: Display a long mode key on the corresponding mode screen
SPECK-DP Use it to enable/disable indication of a warning for dust detection in
streamreading.
2
<Setting value>
0: disable indication (default), 1: enable indication
CNT-DISP Setting whether or not to display a serial number when the counter confirmation
key is pressed
2
<Setting value>
0: Display a serial number [Default]
1: Do not display a serial number
PH-D-SEL Setting the number of lines for printing in Photo mode
2
<Setting value>
0: 141 lines [Default]
1: 134 lines
OP-SZ-DT switches on or off the original size detection function with the copyboard cover
open.
0: disable size detection if the copyboard cover is open (default; the appropriate
original size must be entered manually on the control panel).
1: enable original size detection when the copyboard cover is open (use it if auto
size detection is desired as when copying a book; detection is executed in response
to a press on the Start key).
2
NW-SCAN Enabling or disabling the network scan function
2
<Setting value>
0: Network scan function disabled [Default]
1: Network scan function enabled
MEMO:
Not changeable for anything in Japan
Always 1 for PSPCL outside Japan
Changeable for other outside Japan
INS-C/S Use it to expand the inserter function.
2
<Setting value>
0: support cover only (default)
1: support cover + interleaf (multi inserter)
TBIC-RNK Use it to reduce uneven intervals.
2
<Setting value>
1 to 5 (default: 1)
HDCR-DSP Setting whether or not display HDD clearance in User mode and changing the
contents of clearance
2
<Setting value>
1: Clear once with 0 [Default]
2: Clear once with random data
3: Clear three times with random data
BCK-CVR Use it to enable or disable the back cover mode function.
2
<Setting value>
0: disable back cover mode
1: enable back cover mode
JOB-INVL Setting the job interval at interrupt
2
<Setting value>
0: Output the next job continuously in interrupt copying (Standard) [Default]
1: Start outputting the next job after the last paper of the interrupted copy job is
output
2: Start outputting the next job after the last paper of all jobs is output
LGSW-DSP Setting whether or not to display [Log display ON/OFF] on the User mode screen
2
[Default]
0: Do not display [Log display ON/OFF] [Default]
1: Display [Log display ON/OFF]
PCL-COPY Supporting the PCL command [COPIES Meru/Pinatubo/Hood]
2
<Setting value>
0: Control each page according to the command of the COPIES command
specified to the page [Default]
1: Meru/Pinatubo/Hood compatible mode
2 to 65535: Reserved
OUT-FD Use it to select face-down (FD) delivery at all times. 2
<Setting value>
0: use facedown output normally
1: use facedown output at all times
COPIER > OPTION >USER
Sub-item Description Level