manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 682 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 682

Chapter 14  

14-28

14.4 Laser Exposure System

14.4.1 Points to Note When Replacing the Laser 

Unit

0008-4300

iR105i/iR105+ / iR9070

1) Check to make sure that the Execute/Memory lamp in the control

panel is OFF; then, turn off the main power switch.

2) Disconnect the power plug from the power outlet.

The machine remains powered as long as the power plug is connected to

the  power outlet. Be sure to disconnect it.

3) Replace the laser unit.

4) Record the values (LA-DELAY) indicated on the label attached to the

new laser unit.

5) Assemble the machine, and connect the power plug to the power

outlet; then, turn on the main power switch.

6) Enter the values recorded in step 4) using service mode: COPIER>

ADJUST> LASER> LA-DELAY.

14.4.2 When Replacing the Laser Unit

0008-8468

 / iR85+ / iR8070

1) Check to make sure that the Execute/Memory indicator in the control

panel is OFF, and turn off the main power switch.

2) Disconnect the power plug from the power outlet.

The machine remains supplied with power as long as the power plug

remains connected to the power outlet. Be sure to disconnect the power

plug.

3) Replace the laser unit.

4) Take notes of the settings (LA-DELAY) on the label attached to the

new laser unit.

5) After assembling the machine, connect the power plug to the power

outlet, and turn on the main power switch and the control panel

power switch.

6) Enter the settings recorded in step 4) in service mode:

COPIER>ADJUST>LASER>LA-DELAY.

14.4.3 Checking the Laser Power

0007-0662

iR105i/iR105+ / iR9070

1) Check to make sure that the Data lamp in the control panel is OFF,

and turn off the main power switch.

2) Disconnect the power plug from the power outlet.

3) Remove the copyboard glass.

4) Open the laser power checker slot cover [1].

F-14-56

5) Shift the switch of the laser power checker (FY9-4008) to '2'.

6) White orienting the laser power checker so that its light-receiving

face [1] is as shown, fit it in.

F-14-57

7) Connect the probe lines of the laser power checker to a digital

multimeter.

F-14-58

[1]

[1]

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов