Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 1054 / 1122

Chapter 17
17-210
- If NG is displayed, the IP address of the local machine may be wrong or the network controller may be faulty. Check the IP address with the system
administrator or replace the main controller circuit board.
- If OK is displayed, there seem to be no problems about the network setting of the local machine or the network controller.
Then the problem may be attributable to the user network environment. Report this to the system administrator and request action.
F-17-37
17.7.1.2 Copier List
0008-7985
/ iR8070
<PG>
T-17-214
<NETWORK>
COPIER>TEST>PG
Sub-item Description Level
TYPE Enter a test print type number and press the Start key for test printing. (After test
printing, be sure to return the number to 0.)
0: Image from CCD (Ordinary print)
1: Checker
2: 17 tones (Error diffusion method [T0BIC])
3: 17 tones (Dither screen method)
4: Totally white 00H
5: Halftone 80H (Error diffusion method [T0BIC])
6: Halftone 80H (Dither screen method)
7: Totally black FFH
8: Horizontal line (space: 27 dots, line width: 40 dots)
9: Horizontal line (space: 50 dots, line width: 60 dots)
10: Horizontal line (space: 3 dots, line width: 2 dots)
11: Halftone 60H (Error diffusion method [T0BIC])
12: Halftone 60H (Dither screen method)
13: Halftone 30H (Error diffusion method [T0BIC])
14: Halftone 30H (Dither screen method)
15 - 20: For development
1
TXPH Use it to switch between text mode and photo mode for test printing.
1
<Setting range>
0 to 4
PG-PICK Selecting an output stage for test printing
1: Cassette 1
2: Cassette 2
3: Cassette 3
4: Cassette 4
5: Side deck
6: Manual feed
7 - 8: Not used
1
2-SIDE Setting the output mode for test printing
0: Simplex [Default] 1: Duplex
1
PG-QTY Setting the number of pages for test printing
1 to 999 [Default: 1]
1
0 . 0 . 0 . 0
+/- OK
<NETWORK> < 1/1 > <READY >
IP address input
Result (OK/NG)