Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 304 / 1122

Chapter 5
5-52
the mirror without detaching the cable).
1) Remove the right glass retainer (2 screws).
2) Remove the copyboard.
3) Move the No. 1 mirror base [1] to the center.
F-5-178
When moving the mirror base, be sure not to touch the mirror or the
lamp or impose force to avoid dirt or damage.
4) Peel off the Warning label [1] from the flexible cable [2].
F-5-179
5) Push in the claw [1] inside to free the flexible cable fixing plate [2] of
the connector.
F-5-180
6)Using a small screwdriver [1], push the 2 protrusions [3] used to hook
the flexible cable [2]) to disconnect the cable from the connector.
F-5-181
- When mounting it, butt and keep the flexible cable against the
rearmost, and push in the fixing plate while holding it level.
- When pushing in the fixing plate, take care not to touch the reflecting
plate.
5.4.17.6 Routing the Scanner Drive Cable
0008-8055
/ iR8070
Route the scanner cable to each pulley and hook mirror base in the order
indicated:
1) Loosen the screw on the cable fixing plate.
2) Fit the ball of the cable into the hole of the drive pulley, and wind the
cable (4 times inward,
5 times outward); then, tape it in place. When winding, be sure that the
[1]
[1]
[2]
[1]
[2]
(before
freeing)
[2]
(after
freeing)
[1]
[2]
[3]
[3]