manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 693 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 693

Chapter 14

14-39

9) Fit the potential checker electrode (FY9-3041) [2] to the potential

sensor [1].

F-14-88

When fitting the checker electrode to the potential sensor, make sure that

the magnet of the checker electrode will not come into contact with the

potential sensor cover.

10) Connect the cable [1] of the potential sensor checker electrode to the

frame assembly (GND) [2] of the machine.

Never bring the clip into contact with the sensor cover. Be sure to fit it

fully away from the sensor window.

F-14-89

11) Fit the door switch actuator in the door switch assembly.

12) Connect the power plug to the power outlet, and turn on the main

power switch.

13) Execute the following in service mode: COPIER> FUNCTION>

DPC>OFST.

14) Record the value of <OFST> on the service label.

15) Turn off the main power switch.

16) Disconnect the power plug from the power outlet.

17) Detach the potential sensor checker electrode.

18) Put back the potential sensor support plate.

19) Connect the power plug, and turn on the main power switch.

14.7.15 Replacing the Potential Sensor/Potential 

Control PCB

0008-8470

 / iR8070

1) Check to make sure that the Execute/Memory lamp in the control

panel is OFF, and turn off the main power switch.

2) Disconnect the power plug from the power outlet.

The machine remains supplied with power as long as its power plug is

connected to a power outlet even when its main power switch is turned

off. Be sure to disconnect the power plug.

3) Replace the potential sensor/potential control PCB.

The potential sensor and the potential control PCB are adjusted as a pair,

requiring simultaneous replacement.

4) Remove the developing assembly, and slide out the process unit.

5) Disconnect the connector [1] of the potential sensor.

F-14-90

6) Remove the two screws [1], and detach the potential sensor support

plate [2].

F-14-91

7) Put the developing assembly and the process unit back into their

initial positions.

8) Connect the connector [1] of the potential sensor.

F-14-92

9) Fit the potential sensor checking electrode (FY9-3041) [2] to the

potential sensor [1].

[1]

[2]

[1]

[2]

[1]

[2]

[1]

[1]

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов