manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 800 / 1122

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 800

Chapter 16  

16-4

16.1.5 Error Code List

0008-9146

iR85+

T-16-3

E602

There is an error on the hard disk.

E604

The image memory is faulty or is inadequate.

E609

There is an error on the HDD.

E610

The HDD coding key is faulty.

E710

There is an error in the initialization of the IPC.

E711

There is an error in the IPC communication.

E712

Communication error with the ADF

E713

There is an error in the communication with the finisher.

E717

There is an error in the communication with the NE controller.

E719

There is a coin vendor error.

E730

There is a PDL software error.

E732

There is an error in the communication with the scanner.

E733

There is an error in the communication with the printer.

E740

There is an error on the Ethernet board.

E744

There is an error in the language file/boot ROM.

E745

There is a fault on the TokenRing board.

E746

The accessories board is of the wrong type.

E748

Mismatch in controller board and SDRAM size

E800

There is an error in the auto power-off circuit.

E804

There is an error in the system fan/the power supply cooling fan (1 and 2).

E805

The rotation of the fixing assembly heat discharging fan and separation heat discharging fan is faulty.

E820

The rotation of the drum fan is faulty.

E823

The rotation of the pre-transfer charging assembly fan is faulty. 

E824

The rotation of the primary charging assembly fan is faulty. 

E830

The rotation of the separation fan is faulty.

Code

Description

E000

The temperature of the fixing assembly is abnormally high.

E001

The over-rising in temperature of the fixing assembly is detected.

E002

The rise in temperature of the fixing assembly is faulty.

E003

The fixing temperature is too low after a standby state.

E004

The fixing assembly is faulty.

E005

The absence of the fixing web is detected.

E010

The rotation of the main motor is faulty.

E012

The rotation of the drum motor is faulty.

E013

The lock of the waste toner feed screw is detected.

E014

The rotation of the fixing motor is faulty.

E015

The rotation of the pickup motor is faulty.

E019

The waste toner case is full, or the waste toner case full sensor is faulty.

E020

The difficulty providing toner inside the hopper developing assemblies is detected.

E025

The toner feed motor inside the hopper is faulty.

E032

The counter of the copy data controller or the NE controller is faulty.

E043

The rotation of the side paper deck main motor is faulty.

E051

There is an error in the detection of the horizontal registration home position.

E065

There is an error in the high-voltage output to the primary charging assembly.

E067

There is an error in the high-voltage output.

E068

There is an error in the high-voltage output to the separation charging assembly.

E069

There is an error in the high-voltage output to the transfer charging assembly.

E100

The BD PCB is faulty.

E110

The rotation of the laser scanner motor is faulty.

E111

The rotation of the laser motor cooling fan is faulty.

E121

The rotation of the laser cooling fan (1/2) is faulty.

E240

The communication between the MCON and DCON is faulty.

Code

Description

Содержание ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов