Canon ImageRunner iR8500 Series, Руководство по обслуживанию, Страница: 280 / 1122

Chapter 5
5-28
F-5-52
5.4.2.2 Removing the CCD Unit
0007-2571
iR105i/iR105+ / iR9070
1) Remove the reader controller cover.
2) Free the front/rear claw [2] of the CCD cover [1], and detach the CCD
cover.
F-5-53
3) Remove the fixing screw [1], spring [2], and spring plate [3], and
disconnect the connector (3 locations); then, disconnect the 2 flat
cables [5] from the reader controller PCB, and detach the CCD unit
[6].
F-5-54
5.4.2.3 Removing the CCD Unit
0008-8132
/ iR8070
1) Remove the upper right cover or slide the reader unit.
2) Remove the reader right cover and detach the copyboard glass.
3) Move the No. 1 mirror base to the left end.
4) Remove the right upper cover and the right upper cover base.
5) Remove the reader left cover and the reader front cover.
6) Remove the eight screws [1], and disconnect the connector [2]; then,
detach tje CCD shielding plate [3].
F-5-55
7) Remove the screw [1], and disconnect the connector [2]; then, free the
cable from the cable clamp [3], and detach the original sensor unit
[4].
F-5-56
8) Remove the four screws [1], and disconnect the connector [2]; then,
free the flat cable [3], and free the two fixing claws [4]. Thereafter,
detach the CCD unit [5].
[6]
[5] [4]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
[6]
[5] [4]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[1]
[1]
[2]
[3]
[1]
[4]
[2]
[3]