Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 816 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > ACC
MAX-PRC 1 Set of Coin Manager maximum price
Detail To set the maximum amount to be handled with Coin Manager.
Enter 8800 when specifying 8800 Japanese yen as the maximum amount to be handled with the
Coin Manager that supports Japanese yen.
Use Case At installation of Coin Manager
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
Display/Adj/Set Range 0 to 9999
Default Value 8800
Related Service Mode COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/Memo When a value larger than the maximum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
SRL-SPSW 1 Setting of Serial I/F Kit support
Detail To set the support level of the Serial Interface Kit.
To keep processing performance of printer engine, select "1: Priority on speed".
To correctly stop the output by the upper limit number of sheets, select "2: Priority on upper limit
number of sheets".
Use Case
At installation of Serial Interface Kit
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution With priority on speed, output cannot be correctly stopped by the upper limit number of sheets.
With priority on the upper limit number of sheets, processing performance of the printer engine is
decreased depending on pickup location.
Display/Adj/Set Range 0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number of sheets
Default Value 0
PDL-THR 2 Norm PDL pnt set:External charge mode6/7
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set normal PDL print job processing at external charge mode 6/7.
When 1 is set and external charge mode 6/7 is set with COIN, normal PDL print job is executed
without being cancelled.
Use Case When setting the normal PDL print processing in external charge mode 6/7
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Cancel, 1: Execute
Default Value 0
Related Service Mode COPIER> OPTION> ACC> COIN
CR-TYPE 1 Setting of Card Reader
Detail To set the model of the Card Reader.
Set 1 in the case of connecting the Card Reader-C1. It operates even 0 is set, but recognition rate
decreases.
Use Case
When connecting the Card Reader-C1
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Card Reader-F1, 1: Card Reader-C1
Default Value 0
8. Service Mode
805