Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 661 / 987

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > COLOR
MD-OFS-M 2 Adj M mid dens area clr balance: copy
Detail To adjust the color balance of the medium density area of M-color for copy operation.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density] in the main menu to the
setting value of this item is applied as the actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust Density] is "5", the density
value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust Density] is "5", the density
value is "8".
Adj/Set/Operate Method 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range -8 to 8
Default Value 0
Additional Functions
Mode
Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings> Options> Color Balance> Fine
Adjust Density
Supplement/Memo In [Fine Adjust Density] under [Copy] and [Access Stored Files] in the main menu, the density value
can be set individually. Although the setting value of this item is just one value, the density may
differ for copy operation and file storage.
MD-OFS-C 2 Adj C mid dens area clr balance: copy
Detail To adjust the color balance of the medium density area of C-color for copy operation.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density] in the main menu to the
setting value of this item is applied as the actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust Density] is "5", the density
value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust Density] is "5", the density
value is "8".
Adj/Set/Operate Method
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
-8 to 8
Default Value
0
Additional Functions
Mode
Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings> Options> Color Balance> Fine
Adjust Density
Supplement/Memo In [Fine Adjust Density] under [Copy] and [Access Stored Files] in the main menu, the density value
can be set individually. Although the setting value of this item is just one value, the density may
differ for copy operation and file storage.
8. Service Mode
650