Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 732 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
BXSHIFT 1 Setting of binding at 0mm binding margin
Detail To set whether to judge the job as a job "without binding" when storing a PDL job in Inbox while
the binding margin is set to "0".
By setting the binding margin to 0 mm while "0" is set, the job is processed as "without binding".
"Booklet" in "Options" on the Inbox screen can be also used.
When "1" is set, it is judged as "with binding" even the binding margin is 0 mm so "Booklet", which
has an exclusive relationship with "binding", cannot be used.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When storing a PDL job in Inbox while 1 is set, "Booklet" in "Options" on the Inbox screen cannot
be used.
Display/Adj/Set Range 0 to 1
0: Without binding, 1: With binding
Default Value 0
HOME-SW 1 Set screen displayed with Main Menu key
Detail To set whether to display the main menu screen or the screen registered as the startup screen
when pressing Main Menu key.
Use Case
Upon user's request (to change the startup screen)
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Main Menu screen, 1: Screen registered as the startup screen
Default Value
0
NO-LGOUT 1 Display/hide of logout button
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to display or hide [Logout] button.
When 0 is set, [Logout] button is displayed on the screen, and logout with the ID key is enabled.
(Normal)
When 1 is set, [Logout] button is not displayed, and logout with the ID key is disabled.
Use Case Upon user's request (for customization, etc.)
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Display, 1: Hide
Default Value 0
T-DLV-BK 1 Set Bk pre-toner low alarm notice timing
Detail To set the timing to notify the pre-toner low alarm for Bk-color (toner level).
Use Case When changing the timing to notify the end of life according to the usage status
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
Since toner level is calculated based on the developing supply count, some errors may occur.
Display/Adj/Set Range
0 to 40
Unit
%
Default Value
It differs according to the location.
Related Service Mode COPIER> OPTION> FNC-SW> T-DLV-CL
Amount of Change per
Unit
1
8. Service Mode
721