manualshive.com logo in svg

Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 421 / 987

Поделиться
Скачать
Canon imageRUNNER ADVANCE C255 Series Скачать руководство пользователя страница 421

E315-0500-00

Image process device timeout error

Detection Description

Transfer of image signal was not completed within the specified period of time at scanning.

Remedy

[Related parts] R1.00
- Harness between the Reader Unit and Main Controller PCB
- Main Controller PCB
[Remedy] Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the related harness/cable, connector and parts.

E315-0510-00

Image process device timeout error

Detection Description

Image processing was not completed within the specified period of time at scanning.

Remedy

[Related parts] R1.00
- Harness between the Reader Unit and Main Controller PCB
- Main Controller PCB
- Reader Controller PCB
[Remedy] Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the related harness/cable, connector and parts.

E315-0530-00

Image process device error

Detection Description

Compression processing of the scanned image into JPEG was terminated abnormally.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the Main Controller PCB.

E315-0531-00

Image process device timeout error

Detection Description

Compression processing of the scanned image into JPEG was not completed within the specified
period of time.

Remedy

[Related parts] R1.00
- Harness between the Reader Unit and Main Controller PCB
- Main Controller PCB
- Reader Controller PCB
[Remedy] Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the related harness/cable, connector and parts.

E315-0540-00

Image process device error

Detection Description

An error occurred during decompression of JPEG.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the Main Controller PCB.

E315-0541-00

Image process device timeout error

Detection Description

Decompression of JPEG was not completed within the specified period of time.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the Main Controller PCB.

E350-0000-00

System error

Detection Description

System error

Remedy

Contact to the sales company.

E350-0001-00

System error

Detection Description

System error

Remedy

Contact to the sales company.

E350-0002-00

System error

Detection Description

System error

Remedy

Contact to the sales company.

7. Error/Jam/Alarm

410

Содержание imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов