Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 721 / 987

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > DBG-LOG
LOG-TRIG 2 Set of debug log storage condition
Detail To set the conditions (timing, types, etc.) to automatically store the debug logs (stored as an archive
file).
By reading the operation setting file of the setting value from the Main Controller, the conditions
written in the file are set.
When setting a new condition is necessary, read the operation setting file provided by R&D from
the USB memory.
Use Case - When changing the conditions of debug log to automatically store
- When setting a new condition
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 99999
Related Service Mode COPIER> FUNCTION> DBG-LOG> LOG2USB, LOG2SRVR
HIT-STS 2 Display of debug log state
Detail To display whether archive file of the debug log which is matched with the conditions set in LOG-
TRIG exists or not.
Use Case
When checking the debug log automatically saved
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
At normal state: OK, At failure occurrence: --
Related Service Mode
COPIER> FUNCTION> DBG-LOG> LOG-TRIG
SYSLOG 2 For R&D
DEFAULT 2 Reset of debug log setting
Detail To clear all debug log settings and return to the state before debug log collection operation.
Use Case - When returning the device in which analyzing the cause of a problem was completed
- When resetting the debug log settings
Adj/Set/Operate Method
Select the item, and then press OK key.
LOG-DEL 2 Clearing of debug logs
Detail To delete the debug log file.
The debug log setting is not reset.
Use Case When clearing the debug log
Adj/Set/Operate Method Select the item, and then press OK key.
HIT-STS2 2 For R&D
OPTION (Specification setting mode)
■ FNC-SW
COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
MODEL-SZ 1 Fixed magnifictn & DADF orgnl dtct size
Detail To set the fixed magnification ratio display and the original detection size with DADF.
It is set automatically at the time of installation of the Reader according to the location.
Use Case Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 3
0: AB configuration (6R5E) for Japan, 1: Inch configuration (5R4E) for North/Middle/South
America, 2: A configuration (3R3E) for Europe, 3: AB/Inch configuration (6R5E) for Asia, Oceania,
South America
Default Value
It differs according to the location.
DH-SW 2 For R&D
8. Service Mode
710