Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 758 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > NETWORK
VLAN-SW 2 ON/OFF VLAN participation packets send
Detail To set whether to send packets for participating in dynamic VLAN at link-up.
Use Case When participating in dynamic VLAN
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
Supplement/Memo - VLAN (Virtual LAN): A method for realizing grouping of terminals depending on the hub, switch
connection port, MAC address, protocol, etc.
- At link-up: At startup, when LAN cable is connected, when recovering from deep sleep, when
pressing the button to reflect the setting (dynamic update)
- If IP address of the machine has not been set, an IP address is assigned after participating in
VLAN.
FTPMODE 1 Set of FTP print default operation mode
Detail To set the default operation mode of FTP print.
Switch the default operation mode between ASCII mode and BIN mode in accordance with user's
environment.
Depending on the client application, FTP print becomes available without executing BIN command.
Use Case
At installation
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: ASCII mode, 1: BIN mode
Default Value
0
SSLMODE 2 Setting of HTTP/HTTPS port open/close
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to open or close HTTP/HTTPS port.
When 1 is set while [Use HTTP] is ON and [SSL Settings] is OFF in Settings/Registration menu,
HTTP port is opened whereas HTTPS port is closed.
When 2 is set while both [Use HTTP] and [SSL Settings] are ON in Settings/Registration menu,
HTTP port is closed whereas HTTPS port is opened.
Use Case When limiting the port to open because of security concern
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 2
0: Normal, 1: Open HTTP port (80/8000) only, 2: Open HTTPS port (443/8443) only
Default Value 0
Additional Functions
Mode
Preferences> Network> TCP/IP Settings> Use HTTP
Management Settings> License/Other> MEAP Settings> SSL Settings
SSLSTRNG 2 Allow weak encryption algorithm for SSL
Detail To set whether to allow using weak encryption algorithm for SSL.
When 1 is set, weak encryption algorithm cannot be used.
Use Case
When prohibiting weak encryption algorithm because of security concern
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Normal mode, 1: Secured mode (TLS_RSA_WITH_RC4_128_SHA and TLS_RSA_WITH_
RC4_128_MD5 are not used)
Default Value
1
8. Service Mode
747